30 January 2023 in Advanced Materials Technologies
Façades are the primary interface controlling the flow of solar energy in buildings and affecting their energy balance and environmental impact. Recently, large‐scale 3D printing (3DP) of translucent polymers has been explored as a technique for fabricating façade components with bespoke properties and functionalities. Transmissivity is essential for building facades, as the response to solar radiation is crucial to obtaining comfort and greatly affects electricity and cooling demands. However, it is still unclear how 3DP parameters affect the optical properties of translucent polymers. This study establishes an experimental procedure to relate the optical properties of PETG components to design and 3DP parameters. It is observed that printing parameters control layer deposition, which governs internal light scattering in the layers and overall light transmission. Moreover, the layer resolution determines angle‐dependent properties. It is shown that printing parameters can be tuned to obtain tailored optical properties, from high normal transparency (≈90%) to translucency (≈60%), and with a range of haze levels (≈55–97%). These findings present an opportunity for large‐scale 3DP of bespoke façades, which can selectively admit or block solar radiation and provide uniform daylighting of a space. In the context of the building sector decarbonization, such components hold great potential for reducing emissions while ensuring occupant comfort.
1 August 2023 in Frontiers of Architectural Research
4 July 2024 in Developments in the Built Environment
7 May 2024 in Energy and Buildings
1 December 2023 in 3D Printing and Additive Manufacturing
Daylight distribution is an essential performance parameter for building facades that aim to maximize user comfort while maintaining energy efficiency. This study investigates the feasibility of using 3D-printed thermoplastic to improve daylight distribution and transmission. To identify how geometry influences light distribution and transmission, 12 samples with various patterns were robotically fabricated. In a physical simulation of spring, summer, and winter, a robotic arm was used to direct light onto the samples in both the vertical and horizontal print pattern directions. In addition, three samples of conventional facade materials, including a polycarbonate panel, a polycarbonate sheet, and a single sheet of glass, were compared with the 3D-printed samples. All samples were examined and compared using high dynamic range imaging to qualitatively characterize luminance. The data analysis demonstrated that 3D-printed geometry can successfully generate customizable diffusive light distribution based on the needs of the user. Furthermore, the results showed that the vertical pattern direction had higher light transmission values than the horizontal pattern direction.
6 July 2024 in Journal of Facade Design and Engineering
Plastic materials, known for their lightweight, formability, transparency, and durability, are the state of the art for building façade applications. Recent advances in Large-Scale Robotic 3D Printing (LSR3DP) have enabled the production of bespoke, translucent façade components. While research has largely focused on individual panel properties, there is a gap in developing a comprehensive strategy for integrating these components into a complete façade system. This paper explores the potential of combining custom 3D-printed façade elements with standard curtain wall connections. Quantitative analysis involves constructing and testing a 1 m x 1 m LSR3DP façade assembly for air and water tightness, benchmarking its performance against a conventional curtain wall. Qualitatively, the approach is evaluated through a mock-up, highlighting the architectural possibilities of blending standard and non-standard façade elements. The findings demonstrate that this hybrid system is both technically viable and opens new design possibilities for architects and façade engineers.