16 June 2023 in Photonics Research
Metasurfaces have provided an unprecedented degree of freedom (DOF) in the manipulation of electromagnetic waves. A geometric phase can be readily obtained by rotating the meta-atoms of a metasurface. Nevertheless, such geometric phases are usually spin-coupled, with the same magnitude but opposite signs for left- and right-handed circularly polarized (LCP and RCP) waves. To achieve independent control of LCP and RCP waves, it is crucial to obtain spin-decoupled geometric phases. In this paper, we propose to obtain completely spin-decoupled geometric phases by engineering the surface current paths on meta-atoms. Based on the rotational Doppler effect, the rotation manner is first analyzed, and it is found that the generation of a geometric phase lies in the rotation of the surface current paths on meta-atoms. Since the induced surface current paths under the LCP and RCP waves always start oppositely and are mirror-symmetrical with each other, it is natural that the geometric phases have the same magnitude and opposite signs when the meta-atoms are rotated. To obtain spin-decoupled geometric phases, the induced surface current under one spin should be rotated by one angle while the current under the other spin is rotated by a different angles. In this way, LCP and RCP waves can acquire different geometric phase changes. Proof-of-principle prototypes were designed, fabricated, and measured. Both the simulation and experiment results verify spin-decoupled geometric phases. This work provides a robust means to obtain a spin-dependent geometric phase and can be readily extended to higher frequency bands such as the terahertz, IR, and optical regimes.
26 June 2025 in IEEE Transactions on Antennas and Propagation
Synthetic aperture radar (SAR) is an advanced radar system capable of high-resolution imaging of targets under all-weather and all-day conditions. Therefore, effective jamming against SAR imaging systems is an important application scenario for achieving stealth and camouflage in modern information warfare. In this paper, a novel jamming imaging architecture based on the time-modulated metasurface is proposed capable of realizing two-dimensional (2D) jamming and camouflage for SAR imaging systems. Firstly, a dual-polarized and conformal time-modulated metasurface is designed, fabricated, and measured, respectively. A high degree of freedom in the manipulation of scattered waves is fully verified under the flat and conformal states of the designed tunable metasurface. On this basis, using this electromagnetic metasurface as the hardware foundation, a 2D multiple phase sectionalized modulation signal model is established and generated by the metasurface to create 2D and highly realistic false targets, achieving camouflage and jamming of protected targets against SAR imaging. The proposed method is thoroughly validated utilizing simulated SAR data and satellite RadarSat-2 data, demonstrating its efficiency, flexibility, and high deception capabilities. These findings establish a general paradigm for the application of time-modulated metasurfaces in novel information electronic warfare.
23 June 2023 in IEEE Transactions on Antennas and Propagation
In this communication, we propose a block-and-guide method of enhancing isolation between Vivaldi antennas in the whole X-band using hyperbolic metasurface (HMS). The HMS consists of periodic parallel metallic strips patterned on a thin dielectric substrate. Due to its strong anisotropy, the HMS exhibits a passband for electromagnetic (EM) waves propagating along the strip direction while a stopband for EM waves propagating along the orthogonal direction. When the HMS is placed close to the opening end of Vivaldi antenna, broadside radiation of the antenna can be suppressed while the end-fire radiation is almost unaffected, leading to enhanced isolation between adjacent antennas. Rather than adding auxiliaries in between antennas, the HMS can be readily integrated into the antenna radiator structure, which is more favorable for practical applications, especially in compact space. To verify this method, the prototype was fabricated and measured. Both simulated and measured results show that when the distance is 0.5λ 0 (λ 0 is the free-space wavelength of 10.0GHz) between two Vivaldi antenna elements, the isolation can be increased by at least 10.0dB in the whole X-band. This work provides an alternative to enhance isolation between wideband end-fire antennas and may find applications in radar, wireless communication, etc.
3 June 2019 in Journal of Physics D: Applied Physics
In this letter, we propose a method of extending the bandwidth of radar absorbing materials (RAMs) by integrating the metasurface and an impedance-matching lattice. The metasurface operates at lower frequencies and is sandwiched as an interlayer between a RAM sheet and an impedance-matching lattice. Absorption at lower frequencies will be enhanced due to the strong resonance of the metasurface, which extends the bandwidth to lower frequencies. To enhance absorption at higher frequencies, a square lattice of RAM patches, rather than a complete sheet, is placed on top of the metasurface to improve the impedance matching. As well as the dissipation of the RAM patches themselves, a high absorption at higher frequencies can also be achieved, which extends the bandwidth towards higher frequencies. Therefore, through such an integrated design, a high absorption of radar waves can be achieved in an ultra-wide band. To verify this method, we designed, fabricated and measured a prototype based on a commercial magnetic rubber RAM. Both the simulated and measured results show that the prototype can achieve an absorption rate of over 90% on average in 2.5–18.0 GHz. Moreover, such a design not only maintains the softness of rubber RAMs, but also reduces the total aerial density, which will facilitate practical applications. This work provides an alternative method for designing microwave absorbers for ultra-wideband applications.
23 January 2023 in Laser & Photonics Reviews
7 November 2019 in Journal of Physics D: Applied Physics
In this paper, we propose a method of achieving multi-octave radar cross section (RCS) reduction by simultaneously engineering the dispersion of polarization-conversion metasurface (PCM) and metamaterial absorber (MA). To this end, a three-layer sandwich structure is devised, with two PCMs as the lower and upper panels and one MA as the lattice core structure. By engineering dispersions of the two PCMs, high-efficiency cross-polarization reflection can be achieved in two separate bands with a wide gap in between them. To bridge this gap, the absorption band of the MA is tailored by engineering the dispersion of spoof surface plasmon polariton (SSPP) modes excited on the MA. In this way, the three operating bands of the two PCMs and the MA can meet end-to-end, spanning over a multi-octave band. To demonstrate this method, we design a MA operating in 7.2–16.8 GHz, two PCMs operating in 16.0–35.0 GHz and 2.0–8.0 GHz. The combined three-layer structure can reduce RCS by more than 10.0 dB in 2.0–35.0 GHz, with a bandwidth more than 1:17. Both the simulation and experiment results verify the design. This work provides an alternative method of designing ultra-wideband RCS reduction structures and the method can also be extended to designing multi-functional planar or conformal structures.