1 November 2010 in Journal of Hydrology
1 December 2011 in Journal of Hydro-environment Research
1 August 2012 in Flow Measurement and Instrumentation
1 May 2008 in Journal of Coastal Research
A simple and robust suspended load transport formula for noncohesive sediment is presented for application to river, estuarine, and coastal environments with the use of depth-averaged models. The formula is based on an exponential profile for the concentration and assumes a constant velocity over depth to simplify the calculations. These assumptions were validated with a large data set, including data with a steady current, wave and current interaction, and breaking waves. The formula has two parameters: the mean sediment diffusivity over depth and the bottom reference concentration. The sediment diffusivity is estimated assuming a linear combination of mixing because of breaking waves and the energy dissipation in the bottom boundary layer from the mean current, waves, or both. The bottom reference concentration is a function of the Shields parameter. Overall, the formula developed in this study yields the best agreement with the compiled data set compared with a number of existing formulas for estimating the suspended load
1 November 2006 in Journal of Hydraulic Engineering
This paper presents a new relationship between the roughness height and the main hydrodynamic and sediment parameters for plane beds under steady current conditions. In order to derive such a formula, a large data base involving plane-bed experiments was compiled from previous investigations and analyzed. Comparisons between the data and different existing predictive formulas for the bed roughness obtained from the literature were also made. A relationship with the Shields parameter only, which is commonly proposed, appeared to be insufficient. The roughness was also found to be a function of a Froude number and a dimensionless settling velocity. A critical Shields parameter was identified up to which the equivalent roughness ratio is proportional to the Shields parameter. The new empirical equation that was developed yields the best results for all conditions investigated, and should improve the understanding of the total shear stress.
1 July 2015 in Advances in Water Resources