Galina Nikolaevna Bondarenko

Galina Nikolaevna Bondarenko

Auto-generated profile, based on publicly available information

Galina Nikolaevna Bondarenko

A.V. Topchiev Institute of Petrochemical Synthesis, Russian Academy of Sciences, Leninsky pr., 29, 119991 Moscow, Russia

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 March 2022 in Membranes
Verified
Journal Article
Open access
PDF file
Igor MakarovIgor Makarov
Igor Makarov
LGLyudmila K. Golova
Lyudmila K. Golova
GBGalina N. Bondarenko
Galina N. Bondarenko
T. S. AnokhinaT. S. Anokhina
T. S. Anokhina
EDEvgenia Dmitrieva
Evgenia Dmitrieva
GSGulbarshin Kozhakhmetovna Shambilova
Gulbarshin Kozhakhmetovna Shambilova
The work is focused on the study of the influence of the cellulose type and processing parameters on the structure, morphology, and permeability of cellulose films. The free volume of the cellulose films was evaluated by the sorption of n-decane, which is a non-solvent for cellulose. The structural features of the membranes and their morphology were studied using X-ray diffraction, IR spectroscopy, SEM, and AFM methods. The characteristic features of the porous structure and properties of cellulose films regenerated from cellulose solutions in the N-methylmorpholine-N-oxide (NMMO) and cellophane films were compared. Generally, cellulose films obtained from solutions in NMMO have a higher permeability and a lower rejection (as measured using Orange II dye) as compared to cellophane films. It was also found that the cellulose films have a higher ultimate strength and modulus, whereas the cellophane films are characterized by higher elongation at break.

13 February 2017 in Fibers
Verified
Journal Article
Open access
PDF file
Ilya BorisovIlya Borisov
Ilya Borisov
AOAnna Ovcharova
Anna Ovcharova
DBDanila Bakhtin
Danila Bakhtin
Stepan BazhenovStepan Bazhenov
Stepan Bazhenov
Alexey VolkovAlexey Volkov
Alexey Volkov
Vladimir VolkovVladimir Volkov
Vladimir Volkov
For the development of high efficiency porous supports for composite membrane preparation, polysulfone (PSf) hollow fiber membranes (outer diameter 1.57 mm, inner diameter 1.12 mm) were modified by air plasma using the low temperature plasma treatment pilot plant which is easily scalable to industrial level and the Piranha etch (H2O2 + H2SO4). Chemical and plasma modification affected only surface layers and did not cause PSf chemical structure change. The modifications led to surface roughness decrease, which is of great importance for further thin film composite (TFC) membranes fabrication by dense selective layer coating, and also reduced water and ethylene glycol contact angle values for modified hollow fibers surface. Furthermore, the membranes surface energy increased two-fold. The Piranha mixture chemical modification did not change the membranes average pore size and gas permeance values, while air plasma treatment increased pore size 1.5-fold and also 2 order enhanced membranes surface porosity. Since membranes surface porosity increased due to air plasma treatment the modified membranes were used as efficient supports for preparation of high permeance TFC membranes by using poly[1-(trimethylsilyl)-1-propyne] as an example for selective layer fabrication.

13 December 2018 in Polymers
Verified
Journal Article
Open access
PDF file
DADmitry A. Alentiev
Dmitry A. Alentiev
DDDariya M. Dzhaparidze
Dariya M. Dzhaparidze
NGNatalia N. Gavrilova
Natalia N. Gavrilova
VSVictor Shantarovich
Victor Shantarovich
EKElena V. Kiseleva
Elena V. Kiseleva
Maxim BermeshevMaxim Bermeshev
Maxim Bermeshev
New microporous homopolymers were readily prepared from norbornadiene-2,5, its dimer and trimer by addition (vinyl) polymerization of the corresponding monomers with 60–98% yields. As a catalyst Pd-N-heterocyclic carbene complex or Ni(II) 2-ethylhexanoate activated with Na+[B(3,5-(CF3)2C6H3)4]− or methylaluminoxane was used. The synthesized polynorbornenes are cross-linked and insoluble. They are glassy and amorphous polymers. Depending on the nature of the catalyst applied, BET surface areas were in the range of 420–970 m2/g. The polymers with the highest surface area were obtained in the presence of Pd-catalysts from the trimer of norbornadiene-2,5. The total pore volume of the polymers varies from 0.39 to 0.79 cm3/g, while the true volume of micropores was 0.14–0.16 cm3/g according to t-plot. These polymers gave CO2 uptake from 1.2 to 1.9 mmol/g at 273 K and 1 atm. The porous structure of new polymers was also studied by means of wide-angle X-ray diffraction and positron annihilation lifetime spectroscopy.

16 March 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
TRTatyana Rokhmanka
Tatyana Rokhmanka
Evgenia GrushevenkoEvgenia Grushevenko
Evgenia Grushevenko
OAOlga V. Arapova
Olga V. Arapova
GBGalina N. Bondarenko
Galina N. Bondarenko
GGGeorgy Golubev
Georgy Golubev
AVAlexey V. Volkov
Alexey V. Volkov
Production of bio-alcohols is one of the approaches used in the development of alternative energy. Pervaporation is a promising option for the separation of bio-alcohols from the fermentation mixture. A serious problem in the process of continuous extraction of biobutanol from the fermentation broth is the contamination of the membrane, which leads to a decrease in its permeability over time. In this work, the transport properties of composite membranes based on polyheptylmethylsiloxane (PHeptMS), polydecylmethylsiloxane (PDecMS), and a commercial membrane MDK-3 were studied during separation of a real ABE-fermentation broth in vacuum pervaporation mode. The study was performed before and after continuous contact of the membranes with the fermentation broth for one month. Visually and by scanning electron spectroscopy, the presence of membrane surface residue and its effect on the wettability of the membrane selective layer by the components of the ABE broth were determined. The sediment composition was evaluated by energy dispersive analysis and infrared spectroscopy. According to the pervaporation separation of the ABE-broth using PHeptMS, PDecMS, and MDK-3 membranes, the butanol flux was 0.029, 0.012, and 0.054 kg/(m2·h), respectively. The butanol-water partition factor was 41, 22, and 13 for PHeptMS, PDecMS, and MDK-3, respectively. After one month of incubation of the membranes in ABE-fermentation broth during the separation of the model mixture, a decrease of 10 and 5% in permeate flux and separation factor, respectively, was observed for all membranes. Temperature dependences (30–60 °C) of permeate flux, permeability, and selectivity were obtained for the membranes after clogging. The most promising in terms of minimal negative changes as a result of fouling was demonstrated by the PHeptMS membrane. For it, the clogging dynamics during separation of the real fermentation broth for 216 h were investigated. Two characteristic steps of decrease in transport and separation properties were observed, after 28 and 150 h of the experiment. After 216 h of experiment, a 1.28-fold decrease in total flux through the membrane, a 9% decrease in butanol permeability, and a 10% decrease in n-butanol selectivity were found for PHeptMS.

13 July 2019 in Polymers
Verified
Journal Article
Open access
PDF file
Sveta OzkanSveta Ozkan
Sveta Ozkan
GKG. P. Karpacheva
G. P. Karpacheva
AKAleksandr Ivanovich Kostev
Aleksandr Ivanovich Kostev
GBGalina Nikolaevna Bondarenko
Galina Nikolaevna Bondarenko
Hybrid nanocomposites based on electroactive polydiphenylamine-2-carboxylic acid (PDPAC) and single-walled carbon nanotubes (SWCNTs) were obtained for the first time. Polymer-carbon nanomaterials were synthesized via in situ oxidative polymerization of diphenylamine-2-carboxylic acid (DPAC) in the presence of SWCNTs by two different ways. Hybrid SWCNT/PDPAC nanocomposites were prepared both in an acidic medium and in the heterophase system in an alkaline medium. In the heterophase system, the monomer and the SWCNTs are in the organic phase (chloroform) and the oxidant (ammonium persulfate) is in an aqueous solution of ammonium hydroxide. The chemical structure, as well as the electrical and thermal properties of the developed SWCNT/PDPAC nanocomposite materials were investigated.

23 May 2023 in Membranes
Verified
Journal Article
Open access
PDF file
DKDenis Olegovich Kalmykov
Denis Olegovich Kalmykov
Sergey ShirokikhSergey Shirokikh
Sergey Shirokikh
Evgenia GrushevenkoEvgenia Grushevenko
Evgenia Grushevenko
SLSergey Legkov
Sergey Legkov
GBGalina N. Bondarenko
Galina N. Bondarenko
Stepan BazhenovStepan Bazhenov
Stepan Bazhenov
Membrane gas–liquid contactors have great potential to meet the challenges of amine CO2 capture. In this case, the most effective approach is the use of composite membranes. However, to obtain these, it is necessary to take into account the chemical and morphological resistance of membrane supports to long-term exposure to amine absorbents and their oxidative degradation products. In this work, we studied the chemical and morphological stability of a number of commercial porous polymeric membranes exposed to various types of alkanolamines with the addition of heat-stable salt anions as a model of real industrial CO2 amine solvents. The results of the physicochemical analysis of the chemical and morphological stability of porous polymer membranes after exposure to alkanolamines, their oxidative degradation products, and oxygen scavengers were presented. According to the results of studies by FTIR spectroscopy and AFM, a significant destruction of porous membranes based on polypropylene (PP), polyvinylidenefluoride (PVDF), polyethersulfone (PES) and polyamide (nylon, PA) was revealed. At the same time, the polytetrafluoroethylene (PTFE) membranes had relatively high stability. On the basis of these results, composite membranes with porous supports that are stable in amine solvents can be successfully obtained to create liquid–liquid and gas–liquid membrane contactors for membrane deoxygenation.