The present study highlights the HER electrocatalytic performance of PdIrSnZnMo HEA with the delivery of a low overpotential of 17 mV to reach the benchmark current density (−10 mA cm −2 ) and excellent stability for 100 h in an acidic medium.
We present pulsed electrodeposition (PED) of FeHf binary hydroxide/oxide (FeHf-BH) nanocomposites from aqueous electrolyte baths containing NO3- ions. The deposition was carried out on a graphite foil at room temperature. This study, for the first time, demonstrated a controlled variation of Fe (5.9-49.9 avg. at. %) and Hf (2.4-58.7 avg. at. %) in the deposited materials. We showed the high scalability of FeHf-BH deposition by tuning the PED parameters. The morphology, composition, chemical structure, and oxidation states of metals in the materials were investigated by using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The deposited materials consist of agglomerated nanoparticles sized 50-150 nm. Thermal annealing studies revealed improved crystallinity, with the appearance of thermodynamically stable oxide phases of Fe3O4, Fe2O3, and HfO2 in the composites. The oxygen evolution activity of the materials was analyzed in an alkaline medium based on the Hf content. The optimized material containing 11.9 avg. at. % Hf demonstrated an OER onset potential of 1.63 V vs RHE, Tafel slope of 47 mV dec-1, and required only 470 mV overpotential to reach a 50 mA cm-2 OER current. These PED strategies of designing FeHf-BH materials may open an avenue for designing other catalytically active and stable multimetallic hydroxides/oxides composites.
9 October 2024 in Journal of Materials Research and Technology
The stability of WO3 photoelectrodes in neutral media remains a significant challenge, particularly for those fabricated by anodic W oxidation. We report a simple, one-step hydrothermal treatment that transforms porous anodic WO3 into nanorods with a dispersed FeWO4 phase. This morphological evolution combines the advantages of high-aspect-ratio structures for improved light absorption with reduced charge recombination losses. The treatment also promotes preferential WO3 growth along the monoclinic (002) planeknown to favor water splitting. The modified electrodes exhibited considerable photoluminescence quenching, significantly enhanced charge separation efficiency, and higher photon-to-current conversion, resulting in a photocurrent density that was ∼1.8 times higher at 1.0 V vs RHE. Additionally, oxygen vacancy formation during operation likely contributes to charge redistribution, mitigating surface degradation in sodium sulfate and enabling rapid stabilization of the photocurrent over several hours. Electrochemical impedance spectroscopy reveals evidence of p–n heterojunction due to integration of the tungstate phase with WO3, extended charge carrier lifetimes, and enhanced charge transfer. This scalable surface engineering approach offers a promising route to enhance the performance and durability of anodic WO3 for practical solar-driven water oxidation.