The electrochemical reduction of CO2 is a pivotal technology for the defossilization of the chemical industry. Although pilot-scale electrolyzers exist, water management and salt precipitation remain a major hurdle to long-term operation. In this work, we present high-resolution neutron imaging (6 μm) of a zero-gap CO2 electrolyzer to uncover water distribution and salt precipitation under application-relevant operating conditions (200 mA cm−2 at a cell voltage of 2.8 V with a Faraday efficiency for CO of 99%). Precipitated salts penetrating the cathode gas diffusion layer can be observed, which are believed to block the CO2 gas transport and are therefore the major cause for the commonly observed decay in Faraday efficiency. Neutron imaging further shows higher salt accumulation under the cathode channel of the flow field compared to the land.
Tofu is a toolkit for processing large amounts of images and for tomographic reconstruction. Complex image processing tasks are organized as workflows of individual processing steps. The toolkit is able to reconstruct parallel and cone beam as well as tomographic and laminographic geometries. Many pre- and post-processing algorithms needed for high-quality 3D reconstruction are available, e.g. phase retrieval, ring removal and de-noising. Tofu is optimized for stand-alone GPU workstations on which it achieves reconstruction speed comparable with costly CPU clusters. It automatically utilizes all GPUs in the system and generates 3D reconstruction code with minimal number of instructions given the input geometry (parallel/cone beam, tomography/laminography), hence yielding optimal run-time performance. In order to improve accessibility for researchers with no previous knowledge of programming, tofu contains graphical user interfaces for both optimization of 3D reconstruction parameters and batch processing of data with pre-configured workflows for typical computed tomography reconstruction. The toolkit is open source and extensive documentation is available for both end-users and developers. Thanks to the mentioned features, tofu is suitable for both expert users with specialized image processing needs (e.g. when dealing with data from custom-built computed tomography scanners) and for application-specific end-users who just need to reconstruct their data on off-the-shelf hardware.
Hard x rays from a synchrotron source are used in this implementation of computed laminography for three-dimensional (3D) imaging of flat, laterally extended objects. Due to outstanding properties of synchrotron light, high spatial resolution down to the micrometer scale can be attained, even for specimens having lateral dimensions of several decimeters. Operating either with a monochromatic or with a white synchrotron beam, the method can be optimized to attain high sensitivity or considerable inspection throughput in synchrotron user and small-batch industrial experiments. The article describes the details of experimental setups, alignment procedures, and the underlying reconstruction principles. Imaging of interconnections in flip-chip and wire-bonded devices illustrates the peculiarities of the method compared to its alternatives and demonstrates the wide application potential for the 3D inspection and quality assessment in microsystem technology.
The elucidation of lithium ion transport pathways through a solid electrolyte separator is a vital step toward development of reliable, functional all‐solid‐state batteries. Here, advantage has been taken of the significantly higher neutron attenuation coefficient of one of the most abundant stable isotopes of lithium, 6Li, with respect to that of naturally occurring lithium isotope mixture, to perform neutron imaging on a purpose built all‐solid‐state lithium–sulfur battery. Increasing the 6Li content in the anode while using natural lithium in the solid electrolyte separator and the cathode enhances the contrast such that it is possible to differentiate, during the initial discharge, between the mobile lithium ions diffusing through the cell from the anode and those that are initially located in the solid electrolyte. The sensitivity of neutrons to the different lithium isotopes means that operando neutron radiography allows demonstration of the lithium ion diffusion through the cell while in situ neutron tomography has permitted presentation, in three dimensions, of the distribution of the trapped lithium ions inside the cell in charged and discharged states.
Cretaceous marine hind-limbed snakes are considered to be key fossils for understanding the origin and evolution of snakes. In view of the rarity of such fossils, performing new analyses on described specimens using emerging, cutting-edge techniques should bring important new insights on these forms. We investigated the three-dimensional morphology and inner architecture of the pelvic girdle and hind-limb bones of the type specimen of Eupodophis descouensi Rage and Escuillié, 2000 Rage, J.-C. and Escuillié, F. 2000. Un nouveau serpent bipède du Cénomanien (Crétacé). Implications phylétiques. Comptes Rendus de l’Académie des Sciences, Sciences de la Terre et des Planètes, 330: 513–520. [Google Scholar] , one of the three taxa for which at least one hind-limb is known, using synchrotron-radiation computed laminography (SRCL), a recently developed non-destructive technique that overcomes some of the limitations of synchrotron microtomography for flat, laterally extended objects. This experiment allowed a virtual exhumation of the second, hidden leg of the specimen. The morphology and proportions of the regressed pelvic and hind-limb bones of Eupodophis resemble those of the hind-limbed snakes Pachyrhachis and Haasiophis. As in Haasiophis, four tarsals are observed in each limb, but there are no traces of metatarsals or phalanges. Moreover, despite the presence of osteosclerosis and pachyostosis in the vertebrae and the ribs of Eupodophis, the inner structure of its limb bones is devoid of these osseous specializations and displays a microanatomical organization similar to that of extant terrestrial lizards. This suggests that limb regression in Eupodophis was not due to a qualitative alteration of growth but, more likely, to a local decrease in growth rate or shortening of growth duration.