14 June 2011 in Advanced Materials
31 August 2004 in Physical Chemistry Chemical Physics
Reproducible electrical contacts to organic molecules are created non-destructively by indirect electron beam evaporation of Pd onto molecular films on cooled substrates. In contrast, directly evaporated contacts damage the molecules seriously. Our conclusions are based on correlating trends in properties of a series of molecules with systematically varying, exposed functional groups, with trends in the electrical behaviour of Pd/molecule/GaAs junctions, where these same molecules are part of the junctions.
1 November 2010 in Organic Electronics
1 April 2012 in Organic Electronics
14 November 2012 in Journal of Materials Chemistry C
NVNicola F. Della Vecchia
+5
Eumelanin-type biopolymers have attracted growing interest in the quest for soft bioinspired functional materials for application in organoelectronics. Recently, a metal-insulator-semiconductor device with a good quality interface was produced by spin coating of a commercial synthetic eumelanin-like material on a dry plasma-modified silicon surface. As a proof-of-concept step toward the design and implementation of next-generation eumelanin-inspired devices, we report herein an expedient chemical strategy to bestow n-type performance to polydopamine, a highly popular eumelanin-related biopolymer with intrinsic semiconductor behaviour, and to tune its electrical properties. The strategy relies on aerial co-oxidation of dopamine with suitable aromatic amines, e.g. 3-aminotyrosine or p-phenylenediamine, leading to good quality black polymeric films. Capacitance–voltage experiments on poly(dopamine/3-aminotyrosine) and poly(dopamine/p-phenylenediamine)-based metal insulator semiconductor devices on p-Si indicated a significant increase in flat band voltage with respect to polydopamine and previous synthetic eumelanin-based diodes. Variations of the flat band voltage under vacuum were observed for each device. These results point to polydopamine as a versatile eumelanin-type water-dependent semiconductor platform amenable to fine tuning of its electronic properties through incorporation of π-conjugating aromatic amines to tailor functionality.
7 February 2011 in Natural Hazards and Earth System Sciences
In the last years disturbances in VLF/LF radio signals related to seismic activity have been presented. The radio data were collected by receivers located on the ground or on satellites. The ground-based research implies systematic data collection by a network of receivers. Since 2000 the "Pacific VLF network", conducted by Japanese researchers, has been in operation. During 2008 a radio receiver was developed by the Italian factory Elettronika (Palo del Colle, Bari). The receiver is equipment working in VLF and LF bands. It can monitor 10 frequencies distributed in these bands and, for each of them, it saves the power level. At the beginning of 2009, five receivers were made for the realization of the "European VLF/LF Network"; two were planned for Italy and one for Greece, Turkey and Romania, respectively. In 2010 the network was enlarged to include a new receiver installed in Portugal. In this work, first the receiver and its setting up in the different places are described. Then, several disturbances in the radio signals related to the transmitters, receivers, meteorological/geomagnetic conditions are presented and described.