The effect of Zn-doping in CoFe2O4 nanoparticles (NPs) through chemical co-precipitation route was investigated in term of structural, optical, and magnetic properties. Both XRD and FTIR analyses confirm the formation of cubic spinel phase, where the crystallite size changes with Zn content from 46 to 77 nm. The Scherrer method, Williamson-Hall (W-H) analysis, and size-strain plot method (SSPM) were used to study of crystallite sizes. The TEM results were in good agreement with the results of the SSP method. SEM observations reveal agglomeration of fine spherical-like particles. The optical band gap energy determined from diffuse reflectance spectroscopy (DRS) varies increases from 1.17 to 1.3 eV. Magnetization field loops reveal a ferromagnetic behavior with lower hysteresis loop for higher Zn content. The magnetic properties are remarkably influenced with Zn doping; saturation magnetization (Ms) increases then decreases while both coercivity (HC) and remanent magnetization (Mr) decrease continuously, which was associated with preferential site occupancy and the change in particle size.
1 February 2017 in Journal of Alloys and Compounds
In this work, the perovskite LaMnO3 material has been prepared based on the sol-gel process of synthesis with the participation of combustion. According to the X-ray phase analysis, it was determined that the obtained material consists of LaMnO3 one phase (space group Pm-3m). Nevertheless, it has been determined that the average size of the coherent scattering region of the obtained material is about 24 nm. Moreover, the average particle size is 40-60 nm in case the approximation that the particles are spherical shape. Thus, it has been determined that the specific surface area of the material is 42.1 m2/g. The electrochemical investigations have been performed using nanosized LaMnO3 powder as a cathode material for electrochemical capacitors. The LaMnO3 material under research showed a specific capacity of 40 F/g at a discharge of up to 1V.