31 March 2025 in IEEE Transactions on Instrumentation and Measurement
In the detection scenario of passive radar (PR) for multiple and small targets, the signal-to-noise ratio (SNR) is low. Moreover, in the cross ambiguity function (CAF), the mainlobe and sidelobe widening of strong targets can obscure adjacent weak targets. To address the two challenges, this paper proposes the following approaches. First, a synthesis algorithm is proposed for the CAF using the multi-carrier signals to enhance the SNR. Second, a CAF calculation model is established based on compressive sensing (CS) and multi-carrier signal to suppress mainlobe and sidelobe widening and detect weak targets. Finally, a sparse reconstruction algorithm based on l0 pseudonorm and iterative solution is proposed to solve the difficulty of estimating input parameters. Experimental results show that the proposed approaches achieve an improvement in SNR and enable weak target detection. Compared to other sparse reconstruction algorithms and two-dimensional constant false alarm rate (CFAR) detection algorithms, the proposed approaches have a higher detection rate in the multiple and small targets detection.
13 November 2025 in IEEE Internet of Things Journal
Spatial-temporal beam spoofing (STBS) poses a severe security threat to integrated sensing and communication (ISAC) systems by deliberately manipulating signal properties to fabricate deceptive target echoes, thereby undermining the sensing accuracy and evading the current security measures through the spatial masking and asynchronous injection. To combat this intelligent attack in ISAC, we proposes a beam consistency anomaly detection (BCAD) method, which establishes a physics-constrained verification procedure based on inherent propagation properties of legitimate signals. The proposed BCAD method systematically incorporates essential signal consistency requirements, such as array steering vector coherence, Doppler shift linearity, and phase progression consistency, into multivariate polynomial formulations. It then utilizes sum-of-squares relaxation to rigorously verify the global non-negativity of these polynomials across the entire parameter space encompassing angle-of-arrival, delay, and Doppler shift. This verification process confirms the physical legitimacy of the signal, and a negative result reveals violations of the transmission continuity constraint caused by STBS. Numeric results are presented to show the detection performance of the proposed BCAD method.
13 April 2026 in IEEE Transactions on Information Forensics and Security
In this paper, we explore the vulnerability of the physical uplink shared channel (PUSCH) to a new smart jamming attack in fifth generation (5G) new radio (NR), where an intelligent adversary first executes its attack by sniffing the downlink control information (DCI)-indicated resource scheduling information and then disrupts the PUSCH data transmission effectively and covertly by the precise jamming. To combat such kind of DCI sniffing based smart jamming (DCIS-SJ), we propose a novel method for effective DCIS-SJ suppression leveraging the DCI-scheduled subset identification and the PUSCH resource reconstruction. Our method fundamentally relies on the differences in the spatial domain feature under available control channel elements and resource block group granularities between legitimate users and the DCIS-SJ attacker, to selectively exclude unwanted elements while safeguarding the authenticity of the targeted transmissions. Numerical results evaluate and confirm the effectiveness of our method.
21 April 2025 in IEEE Communications Letters
Uplink control information (UCI) and discontinuous reception (DRX) play important roles for massive machine type communication (mMTC). Despite their standalone significance, a conspicuous gap exists in comprehensively exploring the synergy between UCI and DRX concerning both energy conservation and latency reduction for mMTC. In this letter, we propose a UCI-based clustered access and DRX management (UCADM) scheme that strikes a balance between these two critical performance metrics, reducing energy usage while preserving low latency in uplink-downlink interaction for mMTC. Specifically, we present a strictly feasible solution for the proposed UCADM scheme by using the spectral radius and the constraint projection, which can effectively solve DRX switching operations as indicated by scheduling information from UCI. Simulation results confirm the effectiveness of our scheme.
14 October 2025 in IEEE Transactions on Vehicular Technology
Paging-triggered handover in vehicular networks faces critical security challenges from a protocol-aware intelligent penetration attack (IPA) that exploits resource block (RB) mapping patterns and vehicular mobility dynamics, leading to severe safety hazards such as collisions and emergency service unavailability. In view of this, we propose a hierarchical RB-aware subspace separation (HiRASS) method to mitigate IPA by exploiting the inherent structural disparities between the legitimate paging signals and the adversarial IPA interference. The proposed HiRASS method leverages the low-rank properties of vehicular paging signals, arising from spatial antenna correlation and temporal periodicity in discontinuous reception cycles, to isolate protocol-specific IPA components through subspace decomposition. Numeric results evaluate and confirm the effectiveness of our IPA mitigation method.