1 March 2017 in Nanophotonics
Efficient light energy transfer between optical waveguides has been a critical issue in various areas of photonics and optoelectronics. Especially, the light coupling between optical fibers and integrated waveguide structures provides essential input‐output interfaces for photonic integrated circuits (PICs) and plays a crucial role in reliable optical signal transport for a number of applications, such as optical interconnects, optical switching, and integrated quantum optics. Significant efforts have been made to improve light coupling properties, including coupling efficiency, bandwidth, polarization dependence, alignment tolerance, as well as packing density. In this review article, we survey three major light coupling methods between optical fibers and integrated waveguides: end‐fire coupling, diffraction grating‐based coupling, and adiabatic coupling. Although these waveguide coupling methods are different in terms of their operating principles and physical implementations, they have gradually adopted various nanophotonic structures and techniques to improve the light coupling properties as our understanding to the behavior of light and nano‐fabrication technology advances. We compare the pros and cons of each light coupling method and provide an overview of the recent developments in waveguide coupling between optical fibers and integrated photonic circuits.
22 July 2020 in Optics Express
We experimentally demonstrate the use of silicon photonics circuit (SPC) in the simple and cost-effective photonics-aided Terahertz (THz) wireless transmission system. We perform theoretical investigation (with experimental confirmation) to understand that the system performance is more sensitive to the free space path loss (FSPL) at the THz wireless link than the SPC’s insertion loss. The SPC, we design and fabricate, combines two incident optical carriers at different wavelengths and modulates one of two optical carriers with data to transfer, consequently reducing the system footprint that is indeed one of the key challenges that must be tackled for better practicability of the THz communication system. We perform experimental verification to show the feasibility of 40 Gb/s non-return-to-zero (NRZ) on-off-keying (OOK) signal transmission over 1.4 m wireless link for possibly its application in short-reach indoor wireless communication systems utilizing (sub-)THz frequency band such as, e.g., indoor WiFi, distributed antenna/radio systems, rack-to-rack data delivery, etc. The SPC could be further integrated with various photonic elements such as semiconductor optical amplifiers, laser diodes, and photo-mixers, which will enable the path towards all-photonic THz-wave synthesizers.
11 January 2022 in Optics Express
Coherent terahertz (THz) wireless communication using silicon photonics technology provides critical solutions for achieving high-capacity wireless transmission beyond 5G and 6G networks and seamless connectivity with fiber-based backbone networks. However, high-quality THz signal generation and noise-robust signal detection remain challenging owing to the presence of inter-channel crosstalk and additive noise in THz wireless environments. Here, we report coherent THz wireless communication using a silicon photonic integrated circuit that includes a dual-parallel Mach-Zehnder modulator (MZM) and advanced digital signal processing (DSP). The structure and fabrication of the dual-parallel MZM-based silicon photonic integrated circuit are systematically optimized using the figure of merit (FOM) method to improve the modulation efficiency while reducing the overall optical loss. The advanced DSP compensates for in-phase and quadrature (IQ) imbalance as well as phase noise by orthogonally decoupling the IQ components in the frequency domain after adaptive signal equalization and carrier phase estimation. The experimental results show a reduction in phase noise that induces degradation of transmission performance, successfully demonstrating error-free 1-m THz wireless transmission with bit-error rates of 10−6 or less at a data rate of 50 Gbps.
14 July 2018 in Optics Communications
17 August 2020 in IEEE Access
We propose to implement a 2-channel optical-time-division-multiplexed (OTDM) system for short-reach optical interconnects by using a sinusoidally modulated light source instead of a complicated mode-locked laser as an input pulse source. In this system, the OTDM signal is obtained by bit-interleaving two optical return-to-zero (RZ) signals generated by using the sinusoidally modulated light. We operate these RZ signals in the orthogonal in-phase and quadrature domains to avoid the unwanted beat components. After the transmission, the OTDM signal is detected by using single photodetector, and then processed by a $2\times 2$ multiple-input multiple-output equalizer. For a demonstration, we generate 150-Gb/s OTDM signal operating in the 8-level pulse-amplitude modulated (PAM-8) format by using commercial LiNbO 3 Mach-Zehnder modulators and transmit this OTDM signal over 1.9 km of the standard single-mode fiber (SSMF). In addition, we fabricate the proposed OTDM transmitter in an integrated silicon-photonics chip and use it to demonstrate the transmission of the 64-Gb/s OTDM PAM-4 signal over 2.2 km of SSMF.
10 November 2023 in Optics Express
Integrated microring resonators are well suited for wavelength-filtering applications in optical signal processing, and cascaded microring resonators allow flexible filter design in coupled-resonator optical waveguide (CROW) configurations. However, the implementation of high-order cascaded microring resonators with high extinction ratios (ERs) remains challenging owing to stringent fabrication requirements and the need for precise resonator tunability. We present a fully integrated on-chip second-order CROW filter using silicon photonic microelectromechanical systems (MEMS) to adjust tunable directional couplers and a phase shifter using nanoscale mechanical out-of-plane waveguide displacement. The filter can be fully reconfigured with regard to both the ER and center wavelength. We experimentally demonstrated an ER exceeding 25 dB and continuous wavelength tuning across the full free spectral range of 0.123 nm for single microring resonator, and showed reconfigurability in second-order CROW by tuning the ER and resonant wavelength. The tuning energy for an individual silicon photonic MEMS phase shifter or tunable coupler is less than 22 pJ with sub-microwatt static power consumption, which is far better than conventional integrated phase shifters based on other physical modulation mechanisms.