3 October 2017 in CrystEngComm
A zinc coordination complex with terpyridyl derivative as ligand exhibits mechanochromic and thermochromic luminescence behaviors with reversible color changes visible to the naked eye from pink to blue-purple upon mechanical grinding and from pink to blue upon heating.
4 March 2022 in Journal of Materials Chemistry A
Organic cathode materials have attracted significant research attention recently, yet their low electronic conductivity limits their application as solid-state cathodes in lithium batteries. This work describes the development of a novel organic cathode chemistry with significant intrinsic electronic conductivity for solid-state thin film batteries. A polymeric charge transfer complex (CTC) cathode, poly(4-vinylpyridine)-iodine monochloride (P4VP·ICl), was prepared by initiated chemical vapor deposition (iCVD). Critical chemical, physical, and electrochemical properties of the CTC complex were characterized. The complex was found to have an electronic conductivity of 4 × 10−7 S cm−1 and total conductivity of 2 × 10−6 S cm−1 at room temperature, which allows the construction of a 2.7 μm thick dense cathode. By fabricating a P4VP·ICl|LIPON|Li thin film battery, the discharge capacity of P4VP·ICl was demonstrated to be >320 mA h cm−3 on both rigid and flexible substrates. The flexible P4VP·ICl|LIPON|Li battery was prepared by simply replacing the rigid substrate with a flexible polyimide substrate and the as-prepared battery can be bent 180° while maintaining electrochemical performance.
29 January 2025 in Macromolecules
Fluoropolymers possess among the lowest indexes of refraction for dense, continuous materials, but their crystallinity typically leads to light scattering and haze. In this work, we studied poly(1H,1H,2H,2H-perfluorodecyl acrylate) (pPFDA) as a low-index fluoropolymer and successfully suppressed its crystallization while preserving its desirable low index of refraction (1.36 at 633 nm wavelength) and hydrophobicity (water contact angle of 122°). This was achieved through copolymerization between the hydrophobic 1H,1H,2H,2H-perfluorodecyl acrylate (PFDA) and N-vinylpyrrolidone (NVP) using initiated chemical vapor deposition (iCVD). The resulting copolymer p(PFDA-co-VP) film was smooth (roughness 30 nm), hazy, and disintegrated at 70 °C due to melting. Moreover, the copolymerization resulted in a 16-fold improvement in the deposition kinetics. To demonstrate its excellent performance in practical applications, the low-index copolymer was paired with a high-index poly(divinylbenzene) (pDVB) (n 633 = 1.59) to build a six-layer interference coating. A six-layer fully polymeric interference coating with precise, independent control of each individual layer's thickness was prepared for the first time by iCVD. Optimized for broadband antireflection, it reduced the surface reflectance to 1% over the entire visible spectrum, while withstanding large mechanical strain.
21 September 2020 in Journal of Vacuum Science & Technology A
Next-generation, energy-dense, rechargeable lithium batteries require Li metal anodes that provide ten times the specific capacity of state-of-the-art graphite anodes. But, there are many challenges to the successful utilization of Li anodes, including high chemical reactivity and the propensity to deposit into non-dense, high surface area morphologies, which can result in dendritic growth and significant, associated safety hazards, such as short-circuiting and potential combustion of the liquid electrolyte. Solid-state thin film electrolytes have been used to address both of these challenges. In this review, we will provide an overview of thin film battery designs, highlighting the role of thin film electrolytes, lithium phosphorous oxynitride (LiPON) in particular, in enabling highly reversible, efficient cycling of Li metal anodes. We then discuss progress in thin film electrolyte compositions and vacuum deposition processing that has occurred in roughly the past 20 years. It will be shown how these novel electrolyte compositions and processing capabilities have been used to integrate thin film electrolytes with bulk Li metal anodes required for large format energy storage cells, such as those used in consumer electronics and electric vehicles. We end the review with a brief outlook on the outstanding questions and potential future research directions.
7 August 2020 in ACS Applied Materials & Interfaces