1 April 2015 in The Physics Teacher
1 May 2016 in The Physics Teacher
The characteristics of the inner layer of the atmosphere, the troposphere, are determinant for Earth's life. In this experience we explore the first hundreds of meters using a smartphone mounted on a quadcopter. Both the altitude and the pressure are obtained using the smartphone's sensors. We complement these measures with data collected from the flight information system of an aircraft. The experimental results are compared with the International Standard Atmosphere and other simple approximations: isothermal and constant density atmospheres.
1 September 2014 in The Physics Teacher
1 October 2015 in The Physics Teacher
The sound of church bells is part of most people's everyday life and can easily be examined with smartphones. Similar to other experiments of this column, we use a suitable iOS app. The underlying physical theory of church bells proves to be difficult. A reliable prediction of their natural frequencies based on their exact dimensions is only possible using the finite element method. If you ask bell founders how they calculate the rib of a bell (half longitudinal section of a bell, which completely determines the acoustic properties, Fig. 1) in order to get a church bell with the desired frequency spectrum, you will certainly not get an answer: the art of bell casting is based on centuries of experience and knowledge of the rib structure is only shared with direct descendants. We want to have a closer look at these well-guarded secrets, knowing full well that we cannot fully unravel them. This article presents simple mathematical models and a comparison with a data set of almost 700 bells.
1 January 2016 in The Physics Teacher
In the recently published article “The Sound of Church Bells: Tracking Down the Secret of a Traditional Arts and Crafts Trade,” the bell frequencies have been erroneously oversimplified. The problem affects Eqs. (2) and (3), which were derived from the elementary “coffee mug model” and in which we used the speed of sound in air. However, this does not make sense from a physical point of view, since air only acts as a sound carrier, not as a sound source in the case of bells. Due to the excellent fit of the theoretical model with the empirical data, we unfortunately failed to notice this error before publication. However, all other equations, e.g., the introduction of the correction factor in Eq. (4) and the estimation of the mass in Eqs. (5) and (6) are not affected by this error, since they represent empirical models. However, it is unfortunate to introduce the speed of sound in air as a constant in Eqs. (4) and (6). Instead, we suggest the following simple rule of thumb for relating the radius of a church bell R to its humming frequency fhum: (1)