1 May 2021 in Process Safety and Environmental Protection
1 August 2021 in Process Safety and Environmental Protection
12 December 2022 in ACS Omega
Wood pellets are a fuel used for heat and power generation. Wood pellets are manufactured from forest residues and byproducts of other sectors in the wood processing industry, such as sawmilling. Wood pellet production generates combustible wood dust, which presents the risk of fire and explosion. The objective of this research was to incorporate the principles of inherently safer design (ISD) for the management of combustible dust hazards associated with wood pellet production. Using bow tie analysis to explicitly consider ISD within process hazard analysis (PHA), ISD barriers were successfully identified, including the use of paved surfaces to store feedstock to minimize rocks entering the process and presenting a risk of ignition sources, the use of reduced-size silos to minimize the inventory and increase the turnover frequency, the removal of unnecessary or hazardous equipment, such as fans, following a redesign, and the relocation of hazardous equipment, such as cyclones, outside and away from personnel. A summary of example-based guidance for combustible dust hazards was collected to support additional ISD implementation within PHA as part of the process safety management (PSM). The research also highlights learnings for conducting virtual PHA workshops, as well as identifying opportunities for incorporating ISD within operating wood processing facilities through the incident investigation and risk assessment elements of PSM.
15 August 2024 in The Canadian Journal of Chemical Engineering
Wood pellets, which are manufactured from sawmill and forest residues, are sold in bulk for biomass power generation or in bags for residential heating. Wood pellet production involves combustible dust, which presents the risk of fires and explosions. Process safety management (PSM) is a framework for preventing and mitigating process‐related incidents. While PSM has historically been integrated within the chemical process industries, there is a need to systematically manage process‐related hazards in other sectors, including wood pellet and wood product manufacturing. However, there is a need to identify an approach to PSM implementation that is reasonable and achievable based on the relative complexity of the production process, as well as onsite resources. The scope of this project was to develop an integration tool for wood pellet production to serve as the foundation for a long‐term strategy and implementation plan led by industry. This research resulted in a PSM integration tool consisting of a PSM survey for gap analysis, self‐assessment worksheets that include numerous PSM best practices, factsheets, and an implementation strategy. Using the CSA Z767 Process Safety Management standard as the basis, the research included the development of a phased approach to integrating PSM elements to help improve feasibility. The selection of PSM element phases was informed by surveys of operations and subject matter experts. This research recognizes that, while PSM is currently mostly voluntary in Canada, some organizations have adopted the CSA Z767 standard into regulations and proactively implementing a PSM framework will position companies well should regulations change.
3 April 2021 in Process Safety Progress