This study utilizes Geographic Information Systems (GIS) to analyze soil cover in the Ayyrtau District, North Kazakhstan, focusing on soil types, degradation, and changes over the past 20 years. Chernozems, covering 45% of the area, are the most productive, while Solonetz soils (15%) present...
Purpose. Research aims to study the influence of alloying elements on the properties of steels contributing to the increased sound energy dissipation and reduced acoustic emission in order to develop alloys for the manufacture of mining equipment parts operating in impact mode (drill string and drill bit housing. Methods. Six alloys were developed during the research based on standard steels. Samples were melted in LPZ-1-67 high-frequency induction furnace at a melting temperature of 1700°C. All the samples were made in the form of 50×50×5 mm plates. KazNTU-2017 setup was used to study the impact noise level. The sound signal was calibrated using a ZG-10 generator. The results were corrected for atmospheric pressure using a PF-101 piston telephone. The temperature and humidity in the laboratory were maintained at a constant level. Acoustic measurements were made five times, with subsequent averaging of the results. Findings. The developed alloys No. 4 and No. 6 have increased dissipative characteristics, which allows them to be classified as “quiet” steels. This is due to the increased graphite and ferrite content in their structure, which promotes effective absorption of sound energy. Alloy No. 3 has medium dissipative properties due to the presence of residual cementite in the structure. Originality. Alloys No. 3, 4 and 6 have been found to have a damping logarithmic decrement (δ) of 2 times higher, relative scattering (ψ) of 3 times higher, and internal friction (Q-1) also 3 times higher than that of standard steel grades used in mining machine parts. Practical implications. The developed alloys No.3, No.4 and No.6 are recommended to be used in the manufacture of mining equipment parts. Their increased dissipative properties reduce the noise level of drill string and drill bit housing by 10-12 dBA, help increase the service life of units, as well as improve the working conditions of workers in the mining industry.
In this paper, the patterns of changes in the strength characteristics of the rocks of the Shuak massif are considered. The research focuses on the analysis of the physical and mechanical properties of rocks, taking into account their structure, mineral composition, metasomatic changes, weathering, oxidation and fracturing. In the course of the study, key factors influencing the change in rock strength were identified, such as mineral composition, textural features, degree of fracturing and conditions of occurrence. The obtained results can be used to predict the behavior of rocks in the conditions of field development, as well as in the design of engineering structures on the territory of the massif. Patterns of rock fracturing changes depending on tectonic disturbances and intrusion contacts have also been established, which should be taken into account when organizing engineering and geological studies.