The review considers the prerequisites for the development of accident tolerant fuel and presents the main concepts concerning the use of new fuel rod claddings for nuclear power plants with light water reactors. The current status of development in the field of accident tolerant fuel in Russia and abroad is described. The methods of applying protective coatings to zirconium fuel rod claddings and technologies for replacing zirconium with various alloys (FeCrAl, 42KhNM, and molybdenum) and ceramic composites are considered. The results of studies on the chemical resistance of fuel rod claddings to water and gases, in particular, at high temperatures, are analyzed.
Different models of stable film boiling of liquids that give heat-transfer characteristics under these conditions are examined. The existing models have been demonstrated to have disadvantages associated with a consideration of certain limiting cases. The model of subcooled liquid film boiling, developed by a research group including the authors of this paper in 2017, takes into account the velocity of natural convection at the liquid/vapor interface. This model demonstrates good agreement with experimental data on cooling of spheres and cylinders, but the expression for the heat-transfer coefficient (HTC) contains an empirical coefficient. A new model of heat transfer during subcooled liquid film boiling based on the Bromley assumptions is proposed. An analysis of the contribution of radiation to heat transfer during film boiling has demonstrated that, according to a rough estimate, the contribution of this factor can be as high as 10% during cooling of high-temperature bodies in water when their surface is superheated to 1000 K. The applicability of the new model of stable film boiling of subcooled liquids and the models examined in this paper was validated by comparison with the authors’ experimental data. The test pieces were spheres and cylinders made of different metals (such as stainless steel, nickel, copper, titanium, FeCrAl alloy, zirconium). They were cooled in saturated or subcooled liquids with different thermophysical properties (such as water, ethanol, water-ethanol mixtures of various concentrations, FC-72, nitrogen) at different system pressures. The experimental data agree best of all with the predictions by the newly developed model. The performed comparisons have demonstrated that this model is more accurate (by 10%) compared to other models of heat transfer during cooling of spheres and cylinders in various liquids (such as water, ethanol, FC-72, isopropanol) in the subcooling range from 10 to 180 K at system pressures from 0.02 to 1.00 MPa.
The review describes the results of studies of the strength properties of accident tolerant fuel materials and provides an analysis of the effect of accident tolerant fuel materials on heat transfer during boiling, including critical phenomena and unsteady heat transfer under reactor core reflooding conditions. The literature analysis revealed problems that require further experimental and theoretical study.
1 December 2020 in Journal of Physics: Conference Series
The aim of the present paper is an experimental study of the cooling processes of high-temperature cylindrical samples with different thermal conductivity of the metal in liquids. Studying the influence of material properties on heat transfer during cooling and the possibility of accurately prediction of the transition surface temperature to the intensive cooling regime will allow substantiating the choice of a new type of tolerant fuel from the standpoint of thermophysics. The experiments were conducted for cooling in water and ethanol with different subcoolings under atmospheric pressure. For metals with low thermal effusivity, an increase in the transition temperature with a significant increase of the removed heat fluxes from the surface was experimentally discovered.