Surface plasmon-polaritons (SPPs)-based waveguides, especially hybrid plasmonic nanowires, which have attracted extensive interests due to easy fabrication, high transmittance, subwavelength mode confinement and long propagation distance, are appropriate platforms for enhancing the interaction with graphene. Considering that graphene is a two-dimensional (2D) material with surface conductivity, it is important to enhance the in-plane electrical components parallel to graphene. Here, we propose a tunable graphene optical modulator based on arrayed hybrid plasmonic nanowires, utilizing strong subwavelength confinement of gap-surface plasmonic modes (GSPMs) and near-field coupling in the periodic metasurface structure to enhance effective light-matter interactions. The modulator has a typical modulation depth (MD) of 4.7 dB/μm, insertion loss (IL) of 0.045 dB/μm, and a broadband response. The modulation performance can be further optimized, achieving MD of 16.7 dB/μm and IL of 0.17 dB/μm. Moreover, with the optimized modulator, the 3 dB bandwidth can reach 200 GHz. The energy consumption of modulator is about 0.86 fJ/bit. Our design exhibits fascinating modulation performance, fabrication compatibility and integration potential. It may inspire the schematic designs of graphene-based plasmonic modulator and pave a way to the application of 2D materials-involved optoelectronic devices.
Active plasmonic modulators with high modulation depth, low energy consumption, ultra-fast speed, and small footprint are of interest and particular significance for nanophotonics and integrated optics. Here by constructing a transverse-electric (TE) plasmonic mode and maximizing the in-plane component localized on the graphene surface, we propose a high-performing plasmonic modulator based on a graphene/split ring-like plasmonic waveguide (SRPW) system with a record high modulation depth (20.46 dB/µm) and suppressed insertion loss (0.248 dB/µm) at telecom wavelength 1310 nm, simultaneously possessing pronounced advantage in broadband ability (800-1650 nm) and superior electrical performance with energy consumption of 0.43 fJ/bit and modulation speed of 200 GHz. This innovative design provides a novel approach and idea for enhancing the interaction between light and matter in the waveguide system and will certainly inspire new schemes for the development of on-chip integrated optoelectronic devices.
Surface lattice resonances (SLRs) refer to optical collective excitations existing in arrays of metallic or dielectric nanoparticles. In this paper, we study the optical properties of high-index dielectric films containing rectangle nanohole arrays and reveal the appearance of SLR-like resonance, lattice resonances (LRs), in the films. Two types of LRs, i.e., electric-dipole (ED) and magnetic-dipole (MD) LRs, originating from coupling of localized ED (or MD) excitation to TE (or TM) waveguide modes in the film, have been identified. Analytical formulas have also been derived, which predict well the resonance wavelength of the two types of LR modes. The LRs of the high-index dielectric nanohole array are found to be highly sensitive to structure parameters. By adjusting the structure parameters, a high-Q resonator with a Q factor up to 1600, narrow-band linear polarizer with a high extinction ratio, and high-quality polarization-independent mirror have been suggested. These results may be valuable for designing low-loss optical devices.
We report the exploration of the stabilization effect of the in situ generated N-alkylated DABCO (DABCO = 1,4-diazabicyclo[2.2.2]octane) cation in the family of bromoplumbates and a 1-D bromoplumbate, (Et2DABCO)2n(Pb3Br10)n (1), has been prepared by solvothermal conditions. Optical diffuse reflectance determination shows the band gap of 1 is 3.69 eV, which manifests that 1 is a wide band gap semiconductor. Compared with the band gap of bulk PbBr2 (3.84 eV), 1 exhibits 0.15 eV red shift of absorption edge. While for the reported iodo analogs of this compound, (MPDA)2n(Pb3I10)n and (Et2DABCO)2n(Pb3I10)n, they exhibit 0.53 and 0.47 eV blue shift of the energy gaps compared with the measured value of 2.30 eV for bulk PbI2, respectively. The photoluminescent study of 1 shows that it exhibits a broad emission band centered at 697 nm upon photoexcitation by 345 nm (amount to 3.59 eV). The calculated density of states manifests the theoretical value of the band gap of 1 is 3.422 eV and the origination of photoluminescence can be ascribed to the transition of bonding electrons of Br– anion to the empty orbits of Pb(II) ion.