By means of extensive coupled molecular dynamics–lattice Boltzmann simulations, accounting for grain dynamics and subparticle resolution of the fluid phase, we analyze steady inertial granular flows sheared by a viscous fluid. We show that, for a broad range of system parameters (shear rate, confining stress, fluid viscosity, and relative fluid-grain density), the frictional strength and packing fraction can be described by a modified inertial number incorporating the fluid effect. In a dual viscous description, the effective viscosity diverges as the inverse square of the difference between the packing fraction and its jamming value, as observed in experiments. We also find that the fabric and force anisotropies extracted from the contact network are well described by the modified inertial number, thus providing clear evidence for the role of these key structural parameters in dense suspensions.
The geologic disposal of radioactive waste could lead to confined conditions in which cementitious materials impose a moderate alkaline pH, in which the rocks supply sulfate ions at rather low concentrations. In this context, the purpose of this work was to study the degradation of cement pastes under such conditions using a non-renewed 30 mmol/L Na2SO4 solution without pH regulation. Samples were investigated through laboratory testing and numerical modeling. XRD, SEM–EDS, and micro-indentation acquisitions were performed to follow the evolution of chemical, mineralogical, and mechanical properties during the weak external sulfate attack. Reactive transport modeling was performed with the HYTEC code. Based on these results, the Young’s moduli of the degraded zones were estimated using analytical homogenization. Decalcification occurred despite the high pH value of the solution and significantly affected the mechanical properties. Macroscopic swelling and cracking were caused by the formation of expansive sulfate minerals after 60 days, despite the low sulfate content of the tank solution. The modeling supported the discussion on the evolution of the mineral fronts (ettringite, portlandite, and gypsum).