3 February 2023 in ACM Transactions on Sensor Networks
Current LoRa networks including those following the LoRaWAN specification use the primitive ALOHA mechanism for media access control due to LoRa’s lack of carrier sense capability. From our extensive measurements, the channel activity detection feature that was recently introduced to LoRa for energy-efficiently detecting preamble chirps can also detect payload chirps reliably. This sheds light on an efficient carrier-sense multiple access protocol that we refer to as LMAC for LoRa networks. This article presents the designs of three advancing versions of LMAC that respectively implement carrier-sense multiple access, and balance the communication loads among the channels defined by frequencies and spreading factors based on the end nodes’ local information and then additionally the gateway’s global information. Experiments on a 50-node lab testbed and a 16-node university deployment show that, compared with ALOHA, LMAC brings up to 2.2× goodput improvement and 2.4× reduction of radio energy per successfully delivered frame. Thus, should LoRaWAN’s ALOHA be replaced with LMAC, network performance boosts can be realized.
3 March 2025 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Multi-node localization is crucial for large-scale and densely deployed Internet of Things (IoT) devices connected via LoRaWAN. Due to limitations in bandwidth and the number of RX chains (antennas), existing LoRaWAN-based localization methods often rely on frequency hopping or additional infrastructure to improve location accuracy. Although promising, these methods struggle to localize multiple nodes during packet collisions. In this paper, we propose MC-LoRa, which features a multi-node localization pipeline that includes reliable preamble detection under the near-far effect, tackling inter-symbol interference among multiple packets, and a virtual antenna array method to obtain extra channel state measurements within a single channel. This approach not only enhances angle resolution in our AoA-based system but also eliminates the need for time-consuming frequency hopping, requiring only software processing in existing gateways. Our extensive evaluation results show that MC-LoRa achieves median errors of 7.1m (single-node), 9.2m (multi-node) in an outdoor area of 140m × 100m, and 2.0m (single-node), 3.9m (multi-node) in an indoor area of 20m × 16m, which represent improvements of 1.1×, 2× and 1.5×, 1.7× compared to the baseline. Additionally, MC-LoRa can provide localization service for hundreds of LoRaWAN nodes with accuracy comparable to that of a state-of-the-art single-node system. Its wide localization range and high accuracy enable MC-LoRa to benefit a variety of applications, including asset tracking, navigation in vast indoor spaces (e.g., airports, warehouses and halls), and smart cities.