Ceramic dielectrics are reported with superior energy storage performance for applications, such as power electronics in electrical vehicles. Recoverable energy density (Wrec) of ~ 4.55 J cm-3 with η~90% is achieved in a lead-free relaxor BaTiO3-0.06Bi2/3(Mg1/3Nb2/3)O3 ceramics at ~ 520 kV cm-1. These ceramics may be co-fired with Ag/Pd, which constitutes a major step forward towards their potential use in the fabrication of commercial multilayer ceramic capacitors. Compared to stoichiometric Bi(Mg2/3Nb1/3)O3 doped BaTiO3 (BT), A-site deficient Bi2/3(Mg1/3Nb2/3)O3 reduces the electrically heterogeneity of BT. Bulk conductivity differs from grain boundary only by one order of magnitude which, coupled with a smaller volume fraction of conducting cores due to enhanced diffusion of the dopant via A-site vacancies in the A-site sublattice, results in higher breakdown strength under electric field. This strategy can be employed to develop new dielectrics with improved energy storage performance.
We report the sea sponge-inspired design and preparation of piezoelectric composite generators (PCGs) based on a three-dimensional electroceramic skeleton. The remarkable improvements in the piezopotential of the bioinspired structure have been theoretically analyzed using numerical simulations based on a phase-field simulation. The open-circuit voltage, short-circuit current density and instantaneous power density of the bioinspired PCG reach up to ∼25 V, ∼550 nA cm−2 and ∼2.6 μW cm−2, respectively, corresponding to about 16 times higher power than that of conventional particle based piezoelectric polymer composites. Moreover, the bioinspired PCG displays 30 times higher strain–voltage efficiency under stretching than the state-of-the-art performance of the flexible piezoelectric energy harvesters reported so far.
19 June 2019 in Journal of the American Ceramic Society