New wavelength domains have become accessible for photonic integrated circuits (PICs) with the development of silicon nitride PICs. In particular, the visible and near-infrared wavelength range is of interest for a range of sensing and communication applications. The integration of energy-efficient III-V lasers, such as vertical-cavity surface-emitting lasers (VCSELs), is important for expanding the application portfolio of such PICs. However, most of the demonstrated integration approaches are not easily scalable towards low-cost and large-volume production. In this work, we demonstrate the micro-transfer-printing of bottom-emitting VCSELs on silicon nitride PICs as a path to achieve this. The demonstrated 850 nm lasers show waveguide-coupled powers exceeding 100 µW, with sub-mA lasing thresholds and mW-level power consumption. A single-mode laser with a side-mode suppression ratio over 45 dB and a tuning range of 5 nm is demonstrated. Combining micro-transfer-printing integration with the extended-cavity VCSEL design developed in this work provides the silicon nitride PIC industry with a great tool to integrate energy-efficient VCSELs onto silicon nitride PICs.
Optical interconnects (OIs) based on vertical-cavity surface-emitting lasers (VCSELs) are the main workhorse within data centers, supercomputers, and even vehicles, providing low-cost, high-rate connectivity. VCSELs must operate under extremely harsh and time-varying conditions, thus requiring adaptive and flexible designs of the communication chain. Such designs can be built based on mathematical models (model-based design) or learned from data (machine learning (ML) based design). Various ML techniques have recently come to the forefront, replacing individual components in the transmitters and receivers with deep neural networks. Beyond such component-wise learning, end-to-end (E2E) autoencoder approaches can reach the ultimate performance through co-optimizing entire parameterized transmitters and receivers. This tutorial paper aims to provide an overview of ML for VCSEL-based OIs, with a focus on E2E approaches, dealing specifically with the unique challenges facing VCSELs, such as the wide temperature variations and complex models.
We demonstrate a 6.5 mW single transverse and polarization mode GaAs-based oxide-confined VCSEL at 850 nm. High power is enabled by a relatively large oxide aperture and an epitaxial design for low resistance, low optical loss, and high slope efficiency VCSELs. With the oxide aperture supporting multiple polarization unrestrained transverse modes, single transverse and polarization mode operation is achieved by a transverse and polarization mode filter etched into the surface of the VCSEL. While the VCSEL is specifically designed for light source integration on a silicon photonic integrated circuit, its performance in terms of power, spectral purity, polarization, and beam properties are of great interest for a large range of applications.
We investigate the use of a 1060 nm single-mode vertical-cavity surface-emitting laser (VCSEL) and a 1060 nm single-mode fiber as a competitive single-mode technology for cost- and power-efficient long-reach optical interconnects. Error-free transmission (bit error rate <; 10 -12 ) over 2 km is demonstrated at bitrates up to 40 Gb/s under on-off keying non-return-to-zero (OOK-NRZ) modulation, without equalization, forward-error correction, or other forms of digital signal processing. The VCSEL is extensively characterized with respect to its static and dynamic performances, including the power-voltage-current characteristics, spectral characteristics, beam divergence, modulation response, relative intensity noise, and frequency chirp. The measured dependence of power penalty on fiber length is consistent with an analysis of chirp-induced pulse compression and broadening along the negative chromatic dispersion fiber.
Pulsed operation at a wavelength of 1.27 µm from metamorphic ridge-waveguide (RWG) InGaAs quantum well lasers on GaAs substrates using an alloy graded buffer, grown by molecular beam epitaxy, is demonstrated. Laser performance is anisotropic along the two orthogonal directions with lower threshold currents along the direction. Post-growth rapid thermal annealing further reduces threshold currents. For 4 µm-wide RWG lasers, minimum threshold current densities are 1–2.5 kA/cm2 for cavity lengths 0.6–1.5 mm.