The development of dielectric materials with low permittivity and low loss is a great challenge in wireless communication. In this study, LiLn(PO3)4 (Ln = La, Sm, Eu) ceramic systems were successfully prepared using the traditional solid-state method. X-ray diffraction analysis indicated that the LiLn(PO3)4 ceramics crystallized in a monoclinic structure when sintered at 850–940 ℃. The characteristic peak shifted to high angles with variations in the Ln element, which was ascribed to a reduction in cell volume. Further analysis by structure refinement revealed that the reduction of cell volume resulted from the decline of chemical bond lengths and compression of [LiO4] and [PO4] tetrahedra. Remarkably, the LiLn(PO3)4 ceramic system displayed exceptional performances at low sintering temperatures (910–925 ℃), including high Q·f of 41,607–75,968 GHz, low tf ranging from −19.64 to −47.49 ppm/℃, low εr between 5.04 and 5.26, and low density (3.04–3.26 g/cm3). The application of the Phillips–Van Vechten–Levine theory revealed that the increased Q·f value of the LiLn(PO3)4 systems can be attributed to the enhanced packing fraction, bond covalency, and lattice energy, and the stability of tf was associated with the increase of bond energy. Furthermore, a microstrip patch antenna prototype using the LiEu(PO3)4 ceramics was fabricated. Measurement results demonstrated excellent antenna performances with a bandwidth of 360 MHz and a peak gain of 5.11 dB at a central frequency of 5.08 GHz. Therefore, the low εr LiLn(PO3)4 ceramic systems are promising candidates for microwave/millimeter-wave communication.
Percolative composites always suffer from their unstable and filler-loading dependent microstructures and negative electromagnetic parameters. Here, stable negative permittivity is achieved by in situ constructing a three-dimensional carbon network in the silica spherical matrix after a self-assembly and pyrolysis process. An electrical percolation phenomenon appears with the formation of a carbon network. Once the carbon network is formed, further increasing carbon loadings will only influence the porosity rather than the connectivity due to the nature of the porous carbon itself. Hence, the microstructure and plasma-like negative permittivity are not sensitive to carbon loading, leading to a negligible carbon loading dependent permittivity behavior. Moreover, negative permittivity with small values (−100 < ε′ < 0), beneficial for matching with permeability, was effectively adjusted by changing the carbonization temperature. The carbon composites with negative permittivity showed an extremely low dielectric loss (tan δ = 1–7) compared with metal composites (usually tan δ = 10–100). This work provides a convenient means to obtain stable negative permittivity properties. The carbon composites can be regarded as a promising candidate for metamaterials and will facilitate the applications of materials with negative electromagnetic parameters.
8 October 2021 in Advanced Composites and Hybrid Materials
The mechanism of negative permittivity/permeability is still unclear in the random metamaterials, where the precise control of microstructure and electromagnetic properties is also a challenge due to its random characteristic. Here silver was introduced into porous SiO 2 microsphere matrix by a self-assemble and template method to construct the random metamaterials. The distribution of silver was restricted among the interstices of SiO 2 microspheres, which lead to the precise regulation of electrical percolation (from hoping to Drude-type conductivity) with increasing silver content. Negative permittivity came from the plasma-like behavior of silver network, and its value and frequency dispersion were further adjusted by Lorentz-type dielectric response. During this process, the frequency of epsilon-near-zero (ENZ) could be adjusted accordingly. Negative permeability was well explained by the magnetic response of eddy current in silver micronetwork. The calculation results indicated that negative permeability has a linear relation with ω0.5 , showing a relaxation-type spectrum, different from the “magnetic plasma” of periodic metamaterials. Electromagnetic simulations demonstrated that negative permittivity materials and ENZ materials, with the advantage of enhanced absorption (40dB) and intelligent frequency selection even in a thin thickness (0.1 mm), could have potentials for electromagnetic attenuation and shielding. This work provides a clear physical image for the theoretical explanation of negative permittivity and negative permeability in random metamaterials, as well as a novel strategy to precisely control the microstructure of random metamaterials.
28 October 2019 in ACS Sustainable Chemistry & Engineering