16 March 2021 in Materials Horizons
Functional and structural ceramics have become irreplaceable in countless high-tech applications. However, their inherent brittleness tremendously limits the application range and, despite extensive research efforts, particularly short cracks are hard to combat. While local plasticity carried by mobile dislocations allows desirable toughness in metals, high bond strength is widely believed to hinder dislocation-based toughening of ceramics. Here, we demonstrate the possibility to induce and engineer a dislocation microstructure in ceramics that improves the crack tip toughness even though such toughening does not occur naturally after conventional processing. With modern microscopy and simulation techniques, we reveal key ingredients for successful engineering of dislocation-based toughness at ambient temperature. For many ceramics a dislocation-based plastic zone is not impossible due to some intrinsic property (e.g. bond strength) but limited by an engineerable quantity, i.e. the dislocation density. The impact of dislocation density is demonstrated in a surface near region and suggested to be transferrable to bulk ceramics. Unexpected potential in improving mechanical performance of ceramics could be realized with novel synthesis strategies.
27 March 2021 in Journal of the American Ceramic Society
Most oxide ceramics are known to be brittle macroscopically at room temperature with little or no dislocation‐based plasticity prior to crack propagation. Here, we demonstrate the size‐dependent brittle to ductile transition in SrTiO 3 at room temperature using nanoindentation pop‐in events visible as a sudden increase in displacement at nominally constant load. We identify that the indentation pop‐in event in SrTiO 3 at room temperature, below a critical indenter tip radius, is dominated by dislocation‐mediated plasticity. When the tip radius increases to a critical size, concurrent dislocation activation and crack formation, with the latter being the dominating process, occur during the pop‐in event. Beyond the experimental examination and theoretical justification presented on SrTiO 3 as a model system, further validation on α‐Al 2 O 3 , BaTiO 3 , and TiO 2 are briefly presented and discussed. A new indentation size effect, mainly for brittle ceramics, is suggested by the competition between the dislocation‐based plasticity and crack formation at small scale. Our finding complements the deformation mechanism in the nano‐/microscale deformation regime involving plasticity and cracking in ceramics at room temperature to pave the road for dislocation‐based mechanics and functionalities study in these materials.
4 April 2018 in Journal of Materials Chemistry C
For applications in automotive, aviation and renewable energy industries temperature and power requirements have been significantly increased for electronic components. In particular, capacitors have been identified as the most critical materials considering the fulfillment of these requirements. Ceramics are the most promising materials for high temperature capacitors but no ceramic has been able to meet the necessary electrical properties so far. In this work, Na1/2Bi1/2TiO3 (NBT) solid solutions are investigated to optimize the respective electrical properties. A reduction of bismuth vacancy and oxygen vacancy concentration by increasing the initial Bi content leads to a significant decrease in dielectric loss. Additionally, energy efficiencies of up to 97% can be achieved for the composition Na1/2Bi1/2O3–BaTiO3–CaZrO3 (NBT–BT–CZ) and the temperature range of stable high permittivity together with low dielectric loss (tan δ ≤ 0.02) extends from −67 °C to 362 °C. Hence, optimization of the defect chemistry of NBT-materials results in highly stable electrical properties over a large temperature and electric field range, which leads to the fulfillment of industrial requirements.
5 November 2022 in Nature Communications
Dislocations are usually expected to degrade electrical, thermal and optical functionality and to tune mechanical properties of materials. Here, we demonstrate a general framework for the control of dislocation–domain wall interactions in ferroics, employing an imprinted dislocation network. Anisotropic dielectric and electromechanical properties are engineered in barium titanate crystals via well-controlled line-plane relationships, culminating in extraordinary and stable large-signal dielectric permittivity (≈23100) and piezoelectric coefficient (≈2470 pm V–1). In contrast, a related increase in properties utilizing point-plane relation prompts a dramatic cyclic degradation. Observed dielectric and piezoelectric properties are rationalized using transmission electron microscopy and time- and cycle-dependent nuclear magnetic resonance paired with X-ray diffraction. Succinct mechanistic understanding is provided by phase-field simulations and driving force calculations of the described dislocation–domain wall interactions. Our 1D-2D defect approach offers a fertile ground for tailoring functionality in a wide range of functional material systems.
29 October 2019 in Journal of the American Ceramic Society
Dislocations in oxides can be described as charged line defects and means for one‐dimensional doping, which can tune electrical and thermal properties. Furthermore, theoretically it was shown that dislocations can pin ferroelectric domain walls. Broader application of this concept hinges on the development of a methodology to avail this approach to polycrystalline ceramics. To this end, we use different creep mechanisms as a method to introduce multidimensional defects and quantify structural changes. A deformation map for fine‐grained barium titanate is provided and the influences of the defects and creep regimes are correlated in this first study to modifications of electrical conductivity, dielectric, ferroelectric, and piezoelectric properties. A plastic deformation of 1.29% resulted in an increase in the Curie temperature by 5°C and a decrease in electromechanical strain by 30%, pointing toward electromechanical hardening by dislocations.