Throughout the recent COVID‐19 pandemic, real‐time measurements about shifting use of roads, hospitals, grocery stores, and other public infrastructure became vital for government decision makers. Mobile phone locations are increasingly assimilated for this purpose, but an alternative, unexplored, natively anonymous, absolute method would be to use geophysical sensing to directly measure public infrastructure usage. In this paper, we demonstrate how fiber‐optic distributed acoustic sensing (DAS) connected to a telecommunication cable beneath Palo Alto, CA, successfully monitored traffic over a 2‐month period, including major reductions associated with COVID‐19 response. Continuous DAS recordings of over 450,000 individual vehicles were analyzed using an automatic template‐matching detection algorithm based on roadbed strain. In one commuter sector, we found a 50% decrease in vehicles immediately following the order, but near Stanford Hospital, the traffic persisted. The DAS measurements correlate with mobile phone locations and urban seismic noise levels, suggesting geophysics would complement future digital city sensing systems.
13 March 2020 in Journal of Geophysical Research: Solid Earth
Accurate ground motion prediction requires detailed site effect assessment, but in urban areas where such assessments are most important, geotechnical surveys are difficult to perform, limiting their availability. Distributed acoustic sensing (DAS) offers an appealing alternative by repurposing existing fiber‐optic cables, normally employed for telecommunication, as an array of seismic sensors. We present a proof‐of‐concept demonstration by using DAS to produce high‐resolution maps of the shallow subsurface with the Stanford DAS array, California. We describe new methods and their assumptions to assess H/V spectral ratio—a technique widely used to estimate the natural frequency of the soil—and to extract Rayleigh wave dispersion curves from ambient seismic field. These measurements are jointly inverted to provide models of shallow seismic velocities and sediment thicknesses above bedrock in central campus. The good agreement with an independent survey validates the methodology and demonstrates the power of DAS for microzonation.
22 July 2019 in Journal of Geophysical Research: Solid Earth
Structural imaging and event location require an accurate estimation of the seismic velocity. However, active seismic surveys used to estimate it are expensive and time‐consuming. During the last decade, fiber‐optic‐based distributed acoustic sensing has emerged as a reliable, enduring, and high‐resolution seismic sensing technology. We show how downhole distributed acoustic sensing passive records from the San Andreas Fault Observatory at Depth can be used for seismic velocity estimation. Using data recorded from earthquakes propagating near‐vertically, we compute seismic velocities using first‐break picking as well as slant stack decomposition. This methodology allows for the estimation of both P and S wave velocity models. We also use records of the ambient seismic field for interferometry and P wave velocity model extraction. Results are compared to a regional model obtained from surface seismic as well as a conventional downhole geophone survey. We find that using recorded earthquakes, we obtain the highest P wave model resolution. In addition, it is the only method that allows for S wave velocity estimation. Computed P and S models unravel three distinct areas at the depth range of 50‐750 m, which were not present in the regional model. In addition, we find high VP/VS values near the surface and a possible VP/VS anomaly about 500 m deep. We confirm its existence by observing a strong S‐P mode conversion at that depth.
29 December 2020 in Journal of Geophysical Research: Solid Earth
We show the capabilities of a downhole distributed acoustic sensing (DAS) array in detecting, locating, and characterizing low‐magnitude earthquakes occurring in the vicinity of the Frontier Observatory for Research in Geothermal Energy (FORGE) site in Utah. Continuous data for 10.5 days were acquired in a monitoring well at the FORGE geothermal site during the initial stimulation of an enhanced geothermal system in April–May 2019. Earthquake activity beneath Mineral Mountains, Utah also occurred within 10 km of the FORGE monitoring well. During the experiment, four earthquakes were cataloged by routine processing of the University of Utah Seismograph Stations. Our processing of DAS data finds 77 earthquakes during that period, of which 16 are visible on the regional network. Five additional events are found by template matching DAS data. The magnitude of completeness obtained by DAS processing is better by at least M = 0.5 than the dense surface array around the FORGE site. Depth estimation using DAS is more reliable than using a surface array. While a single vertical DAS array is limited in terms of event location due to its azimuthal ambiguity, multiple DAS wells or a combination of a downhole array with surface stations or near‐surface horizontal DAS could jointly resolve locations. All detected events probably originated from the two active source areas, located 3–5 and 8–10 km away from the FORGE site, respectively. Recorded events can be reliably clustered into several distinct families thanks to the spatial density and large number of DAS channels.
We have used joint least-squares reverse time migration (LSRTM), also known as linearized waveform inversion, to jointly image primary and free-surface-multiples data. Although migration of free-surface multiples can provide the benefit of additional illumination, crosstalk artifacts that appear in images pose a challenge for migration-based approaches. Our method formulates the imaging problem as an inversion problem to attenuate these crosstalk noises in the image. We have developed a modified modeling operator that uses the data as an areal source. The modified operator is used in joint LSRTM to account for the free-surface multiples in the data. We have developed 3D synthetic and field data examples to reveal that our proposed method improves imaging in geologically complex areas and attenuated crosstalk artifacts in the image.
During the past few years, distributed acoustic sensing (DAS) has become an invaluable tool for recording high-fidelity seismic wavefields with great spatiotemporal resolutions. However, the considerable amount of data generated during DAS experiments limits their distribution with the broader scientific community. Such a bottleneck inherently slows down the pursuit of new scientific discoveries in geosciences. Here, we introduce PubDAS—the first large-scale open-source repository where several DAS datasets from multiple experiments are publicly shared. PubDAS currently hosts eight datasets covering a variety of geological settings (e.g., urban centers, underground mines, and seafloor), spanning from several days to several years, offering both continuous and triggered active source recordings, and totaling up to ∼90 TB of data. This article describes these datasets, their metadata, and how to access and download them. Some of these datasets have only been shallowly explored, leaving the door open for new discoveries in Earth sciences and beyond.