Paramananda Joshi

Paramananda Joshi

Auto-generated profile, based on publicly available information

Paramananda Joshi

Ericsson Research, Ericsson AB, Stockholm, Sweden

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 March 2017 in IEEE Access
Verified
Journal Article
Open access
PJParamananda Joshi
Paramananda Joshi
DCDavide Colombi
Davide Colombi
BTBjorn Thors
Bjorn Thors
LLLars-Eric Larsson
Lars-Eric Larsson
CTChrister Tornevik
Christer Tornevik
The aim of this paper is to present results on output power level distributions of 4G user equipment (UE) using data applications based on a very large number of samples collected over seven days in a long-term evolution (LTE) operating network. The output power data have been obtained through network-based measurements conducted for about 7000 UE connected to 41 LTE radio base stations located in rural, suburban, urban, and indoor environments in Sweden. More than 300 000 power samples were collected. In rural environments, the 95th percentile time-averaged output power values were found to be 2.2% of the maximum available power for LTE UE, while the corresponding values were less than 1% in other environments. The mean output powers in all the environments were found to be less than 1% of the maximum available output power. These values are in line with results obtained for 3G UE despite an almost tenfold increase in the achievable peak data throughput. The findings show that knowledge on realistic power levels is important for accurate assessments of the radio frequency electromagnetic field exposure from mobile communication equipment.

30 July 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Davide ColombiDavide Colombi
Davide Colombi
PJParamananda Joshi
Paramananda Joshi
BXBo Xu
Bo Xu
FGFatemeh Ghasemifard
Fatemeh Ghasemifard
VNVignesh Narasaraju
Vignesh Narasaraju
CTChrister Törnevik
Christer Törnevik
In this work, monitoring of the transmit power for several base stations operating in a live 5G network (Telstra, Australia) was conducted with the purpose of analyzing the radio frequency (RF) electromagnetic field (EMF) exposure levels. The base stations made use of state-of-the-art massive MIMO antennas utilizing beamforming in order to optimize the signal strength at the user’s device. In order to characterize the actual EMF exposure from 5G base stations, knowledge of the amount of power dynamically allocated to each beam is therefore of importance. Experimental data on the spatial distribution of the base stations’ transmit power were gathered directly from the network by extracting information on the radio and baseband operations. Out of more than 13 million samples collected over 24 h, the maximum time-averaged power per beam direction was found to be well-below the theoretical maximum and lower than what was predicted by the existing statistical models. The results show that assuming constant peak power transmission in a fixed beam direction leads to an unrealistic EMF exposure assessment. This work provides insights relevant for the standardization of EMF compliance assessment methodologies applicable for 5G base stations.

9 November 2020 in IEEE Access
Verified
Journal Article
Open access
PJParamananda Joshi
Paramananda Joshi
FGFatemeh Ghasemifard
Fatemeh Ghasemifard
Davide ColombiDavide Colombi
Davide Colombi
CTChrister Tornevik
Christer Tornevik
Here, the results on actual output power levels of the fifth generation (5G) user equipment (UE) operating in commercial 5G networks are presented. Using a network management platform, output power data for several UE were collected over fifteen days. Out of about 545 million power samples obtained from UE operating in two 5G commercial networks, the time-averaged output power, of relevance for electromagnetic field (EMF) exposure assessment, was found to be always less than 43% of the maximum time-averaged UE output power considering time division duplexing. In addition, 95% of the time-averaged power samples were found to be less than 8% of the maximum while the mean value was less than 2%. Despite very conservative assumptions in the applied method, the time-averaged 5G UE output power levels were found to be well below the maximum. These results are in line with the output power levels observed for 3G and 4G UE in previous studies and is of importance to characterize the actual EMF exposure of 5G devices during operation.

17 October 2022 in IEEE Transactions on Electromagnetic Compatibility
Verified
Journal Article
Closed access
Davide ColombiDavide Colombi
Davide Colombi
FGFatemeh Ghasemifard
Fatemeh Ghasemifard
PJParamananda Joshi
Paramananda Joshi
BXBo Xu
Bo Xu
CPCarla Di Paola
Carla Di Paola
CTChrister Törnevik
Christer Törnevik
In this article, a methodology for in situ measurements of the radio frequency electromagnetic fields exposure from 5G base stations (BSs) operating at millimeter wave (mmW) frequencies is presented. Measurements were performed in proximity of two BSs operating around 28 and 39 GHz. The measured power density from the BSs when extrapolated for the maximum transmit power was below 30 mW/m 2 at a distance of about 10 m (i.e., below 1% of the ICNIRP limits). A systematic analysis of the challenges related to in situ measurements of 5G mmW exposure is conducted for the first time. It was found that exposure measurement procedures developed for frequencies below 6 GHz (such as those based on extrapolation of the synchronization signal block) are generally applicable also at mmW. When in line-of-sight, dual-polarized directional antennas can be used to accurately characterize the maximum exposure. The angular variation of the incident power density at the measurement location was studied by means of a motor-controlled panorama tilt unit. At the same time, a network counter was used to monitor the directional time-averaged power transmitted by the BS. The study is of importance to standardization committees addressing measurement techniques to assess exposure from mobile networks.

7 November 2024 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
CPCarla Di Paola
Carla Di Paola
PJParamananda Joshi
Paramananda Joshi
Davide ColombiDavide Colombi
Davide Colombi
BXBo Xu
Bo Xu
JBJens Eilers Bischoff
Jens Eilers Bischoff
CTChrister Törnevik
Christer Törnevik
In this study, the actual time-averaged equivalent isotropic radiated power (EIRP) levels of nine 5G massive multiple-input multiple-output base stations (BSs) located inside the Melbourne Cricket Ground were assessed. Measurements were conducted during the 2023 Australian Football League Grand Final with full stadium capacity of over 100,000 attendees, under extreme mobile traffic and user density conditions. Precoding matrix indicator and time-averaged output power data of the BSs were collected using a network monitoring tool to obtain actual time-averaged EIRP statistics corresponding to the spatial distribution of power transmission in different beam directions. The results show that, even under exceptional traffic conditions, the actual time-averaged EIRP levels were significantly below the maximum, with the mean and 95 $^\rm{th}$ percentile values being 7.6% and 9.5% of it, respectively. This corresponds to a reduction of the EMF compliance distance by about 60% compared to the theoretical maximum exposure scenario.