1 August 2001 in Hydrological Sciences Journal
This paper aims at initiating a fundamental understanding of the suspended load transport of river sediment in unsteady flow. Laboratory erosion tests as well as artificial flood experiments are used to evaluate the influence of the transient regime on the transport efficiency of the flow. The erosion experiments reveal that the transport capacity is augmented when the unsteadiness of the flow increases. However, the influence of the transient regime is counteracted by the cohesive properties of the river bed. Field experiments with artificial floods released from a reservoir into a small canal confirm these findings and show a relationship between the friction velocity and the suspended load transport. An appropriate parameter β is proposed to evaluate the impact of the transient regime on the transport of suspended sediment.
1 April 2003 in Journal of Hydraulic Engineering
Granular sediment in pipe inverts has been reported in a number of sewer systems in Europe. Given the range of flow conditions and particle characteristics of inorganic sewer sediments the mode of transport may normally be considered as bed load. Current commercial software for modeling the erosion and transport of sediments in sewer pipes still utilizes well-known, or modified versions of transport equations that were derived for transport of noncohesive sediment in alluvial streams. In this paper the performances of the equations of Ackers and White (originally developed for the transport of river sediments) and of May (derived from laboratory pipe experiments) are examined against two separate data sets. One set is from laboratory erosion experiments on sewer sediment obtained in Paris. A second data set has bed load transport rate measurements recorded in a sewer inlet pipe. The formulas were selected because of their widespread use in the prediction of in-sewer sediment transport both in commercial software and in the latest United Kingdom design guidance for new sewers. The results indicated that both the relationships performed poorly, even in such well-controlled conditions. These formulas have significant difficulties in predicting the erosion thresholds and fractional transport rates for non-uniformly sized in-sewer sediments. An empirical formula to adjust the threshold of motion for individual grain size fractions was developed which significantly improved predictions. Although such techniques have been used in gravel bed rivers, the threshold adjustment function for in-sewer deposits was significantly different from these previously published for fluvial gravels, indicating that a direct transfer of fluvial relationships to sewers may be inappropriate without further research.