The authors obtain a new equation to estimate the forward component of a photon dose generated through the interaction between a target and a short pulse high power laser. As the equation is quite simple, it is useful for calculating the photon dose. The equation shows that the photon dose is proportional to the electron temperature in the range >3 MeV and proportional to the square of the electron temperature in the range <3 MeV. The dose estimated with this method is roughly consistent with the result of Monte Carlo simulation. With some assumptions and corrections, it can reproduce experimental results obtained and the dose result calculated at other laboratories.
A two-beam chirped-pulse-amplification Nd:glass laser system dedicated to x-ray laser research is described. Each beam provides an output energy of 20 J with a typical pulse duration of 1.3 ps. A prepulse of variable duration is generated by use of a novel, to our knowledge, optical system. A reflection optical system, comprised of an off-axis parabolic mirror and a spherical mirror, produces a line focus with 6-mm length and 15-μm width without chromatic aberration. By use of this pumping laser system, the nickel-like silver x-ray laser at a wavelength of 13.9 nm has been demonstrated.
High-energy protons are generated by focusing an ultrashort pulsed high intensity laser at the Advanced Photon Research Center, JAERI-Kansai onto thin (thickness <10 μm) Tantalum targets. The laser intensities are about 4 × 1018 W/cm2. The prepulse level of the laser pulse is measured with combination of a PIN photo diode and a cross correlator and is less than 10−6. A quarter-wave plate is installed into the laser beam line to create circularly polarized pulses. Collimated high energy protons are observed with CH coated Tantalum targets irradiated with the circularly polarized laser pulses. The beam divergence of the generated proton beam is measured with a CR-39 track detector and is about 6 mrad.