19 September 2019 in Arabian Journal for Science and Engineering
12 November 2020 in Iranian Journal of Science and Technology, Transactions of Civil Engineering
1 July 2018 in Acta Physica Polonica A
15 September 2019 in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
The objective of the present study is to reveal the toughening effect of the hazelnut shell on the brittle matrices by using the bending and breaking methods. The polymethylmethacrylate composites reinforced with hazelnut shell powder with 50µ particle size at the weight concentrations of 5%, 10%, 15%, and 20% were prepared. The polymer beam samples were exposed to heat cure procedure and the initial notches were created at a/W=0.1, 0.2, 0.3, 0.4, and 0.5. The Mode I breaking behaviors of the notched at single edge and non-notched composite samples were examined by using three-point bending test. The critical stress intensity factor (KIC), J-integral, initial notch depth, and compliance methods were used in calculations. Besides them, the bending module and bending stress values were calculated. The microstructures of HNSP/PMMA composites were determined by using XRD (x-ray diffractometer), FTIR (Fouirer Transform Infrared Spektrofotometre), and SEM (scanning electron microscope) analyses. According to the results obtained, it was determined that the bending strength, elasticity module, and fracture toughness values increased at 10% additive ratio for the HNSP (hasel nut shell flour)/PMMA (polymethylmethacrylate) composites.
16 May 2022 in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
Bu çalışmada, farklı partikül boyutuna sahip (max.150, 250, 425 mikron) fındıkkabuğu/ polimetilmetakrilat kompozitlere ilave edilen, mineral dolgu maddelerinin ses yutma katsayısına etkileri araştırılmıştır. Kullanılan dolgu maddeleri; camküre, wollastonit, ve mika’dır. Farklı partikül büyüklüğüne sahip fındıkkabuğu polimetilmetakrilat kompozitler % 15 oranında fındıkkabuğu içermektedir. Bu kompozitler içerisine % 2.5, 5 ve 10 oranında dolgu maddeleri ilave edilerek ses yutma testlerinde kullanılacak kompozit numuneler hazırlanmıştır. Mineral dolgulu fındıkkabuğu/polimetilmetakrilat kompozitlerin ses yutma (α) katsayısı, çift mikrofonlu empedans tüpü yöntemiyle belirlenmiştir. Ayrıca kompozitlerin yoğunlukları Arşimed prensibine göre tayin edilip, içerdiği boş hacim yüzde oranları hesaplanmıştır. Numune morfolojisini değerlendirmek amacı ile, deney yapılan numunelerden kırık parçalar elde edilmiştir. Kırık yüzeylerin görüntüleri taramalı elektron mikroskobu ile görüntülenip, içyapı bu görüntüler çerçevesinde değerlendirilmiştir. Çalışmanın sonuçlarına göre, kompozite ilave edilen cam küre ve mikanın oranları ile birlikte, fındıkkabuğu partikül boyutunun da artması ses yutma katsayısını artmıştır. Bu değişimin sade fındıkkabuğu kompozitlere göre maksimum % 247 oranda olduğu belirlenmiştir.