27 September 2018 in IEEE Microwave and Wireless Components Letters
A novel auxiliary difference equation (ADE) finite-difference time-domain (FDTD) method with Crank-Nicolson (CN) scheme is proposed for electromagnetic simulation of dispersive materials in this letter. The proposed method introduces an ADE technique that establishes the relationship between the electric displacement vector and electric field intensity in dispersive media with a difference equation. Hence, the CN scheme is only applied to one of the Maxwell curl equations, resulting in reduced memory usage and computing time. To validate the advantages of the proposed approach, an example with plane wave propagation in a dispersive media is presented. Compared with the conventional ADE-CN-FDTD method, the proposed method consumes much less computing time while preserves excellent simulation accuracy.
31 December 2019 in IEEE Microwave and Wireless Components Letters
A novel unconditionally stable finite-difference time-domain (FDTD) electromagnetic simulation method based on the weighted Laguerre polynomials (WLPs) and isotropic dispersion (ID) finite difference scheme is proposed, which introduces WLPs in the time domain and ID finite difference scheme in the space domain. Based on the analysis of monochrome waves, its numerical dispersion relation is obtained. In order to verify the superiority of this method, an example of plane wave propagation in a 2-D dielectric-loaded cavity is given. Compared with the conventional WLP-FDTD method, this method not only keeps good simulation accuracy but also requires less computing time and memory.
15 March 2023 in IEEE Transactions on Antennas and Propagation
A trapped wave-based solution to design compact planar vertically-polarized (VP) endfire antennas is proposed in this paper. By placing a four-element series-fed magnetic dipole array with an inter spacing of half wavelength within a dual-layer metasurface and loading shorting pin arrays at two edges of the metasurface, the VP radiation is realized in a wide impedance band. In addition, the antenna profile can be further reduced by half according to the electric field distribution within the metasurface. Finally, a VP endfire antenna with a reflection bandwidth of 4.3 ~ 5.4 GHz, a peak gain of 9.8 dBi and a low total profile of 0.065λ 0 (λ 0 is the free-space wavelength at the center operation frequency) is designed for the validation. The proposed antenna can be used for some wireless communication systems on or near the ground plane, such as the car roof-mounted terminal for vehicle-to-roadside unit/base station communications.
16 March 2016 in Journal of Electromagnetic Waves and Applications
In this paper, an efficient finite-difference time-domain (FDTD) method with weighted Laguerre polynomials is proposed to model electromagnetic wave propagation in thin graphene sheets accurately. The proposed method incorporates the intraband terms of the surface conductivity of graphene and introduces an auxiliary differential equation technique to establish the relationship between the electric field intensity and conduct electric current in graphene. Two numerical examples with wave propagation in thin graphene sheet are calculated. Compared with the FDTD method, the results from the proposed method show its accuracy and efficiency.
27 June 2022 in IEEE Microwave and Wireless Components Letters
Based on an auxiliary differential equation (ADE) and a new temporal basis function, we propose a 3-D ADE finite-difference time-domain method (FDTD) with weighted Laguerre polynomials (WLPs), 3-D ADE-WLP-FDTD for short, to calculate wave propagation in general dispersive materials. Our proposed method introduces a linear combination of three WLPs as a temporal basis to improve computational efficiency and reduce memory usage. The ADE technique, which can effectively model dispersive media, was used to establish the relationship between the electric displacement vector and electric field intensity. Two numerical examples were presented to validate the advantages of the proposed approach. The simulation results reveal that compared with the conventional ADE-WLP-FDTD method, the proposed method can speed up the computational process and reduce memory usage with comparable accuracy.