Silicon photonics is an enabling technology that provides integrated photonic devices and systems with low-cost mass manufacturing capability. It has attracted increasing attention in both academia and industry in recent years, not only for its applications in communications, but also in sensing. One important issue of silicon photonics that comes with its high integration density is an interface between its high-performance integrated waveguide devices and optical fibers or free-space optics. Surface grating coupler is a preferred candidate that provides flexibility for circuit design and reduces effort for both fabrication and alignment. In the past decades, considerable research efforts have been made on in-plane grating couplers to address their insufficiency in coupling efficiency, wavelength sensitivity and polarization sensitivity compared with out-of-plane edge-coupling. Apart from improved performances, new functionalities are also on the horizon for grating couplers. In this paper, we review the current research progresses made on grating couplers, starting from their fundamental theories and concepts. Then, we conclude various methods to improve their performance, including coupling efficiency, polarization and wavelength sensitivity. Finally, we discuss some emerging research topics on grating couplers, as well as practical issues such as testing, packaging and promising applications.
25 October 2022 in Journal of Lightwave Technology
Non-mechanical LiDAR systems have attracted extensive research interests due to their advantages of robustness and high beam-steering speed. Recently, spectral scanning has emerged as a promising solid-state beam-steering method, which combines dispersive elements with frequency-swept laser sources to perform ultrafast beam-steering. However, swept light sources used in LiDAR systems, such as semiconductor lasers and supercontinuum sources, are usually suffering from low sweep rate, bulky and high-cost that severely hinder the development of spectral-scanning LiDAR. Here, we propose a non-mechanical spectral-scanning frequency-modulated continuous-wave (FMCW) LiDAR system based on a simple compact tunable vertical-cavity surface-emitting laser (VCSEL). The fast-swept VCSEL together with wavelength division multiplexing (WDM) technology is employed for high-speed beam-steering. Millimeter-level ranging accuracy and a lateral resolution of 0.286° with an overall depth voxel acquisition rate of 128 kHz are achieved experimentally.
Light detection and ranging (LiDAR) with scanning beam has been widely used in autonomous driving and large-scale manufacturing, where the fast-changing scene is of great interest. However, the acquisition rate of current LiDAR is limited by beam steering speed and the round-trip delay, hindering the development of video-rate LiDAR. Here, we uniquely combine all-optical encoders with wavelength-division multiplexing devices to implement spectro-temporal encoding on the illumination light. Parallel detection and fast spectral scanning can be achieved with only one laser and one single photodetector. Our result shows the fastest single-pixel LiDAR to date, and the detection speed can be multiplied with scalability. We demonstrate 3.56-fold improvement of speed for a maximum of 75 m detection range compared with a serial LiDAR. A record acquisition rate of 21.38 MHz for a maximum of 25 m detection range is obtained. This approach has the potential to break the limitation on current ultrafast single-pixel LiDAR and opens a new paradigm for ultrafast-frame-rate imaging systems.
Spectral scan, or beam steering by only wavelength tuning enables inertia-less fast-scanning LiDAR, while the field of view is fundamentally limited by the total available wavelength range and the dispersion ability of common gratings. Here, we propose to relieve the restriction by combining a diffraction grating and a low-cost diffractive element, which enables wide-angle two-dimensional beam steering. An FoV far beyond the reach of other spectral scan methods can be achieved. Several diffractive elements samples are fabricated to demonstrate spectrally scanning field of views of $7.7^{\circ } \times 10^{\circ }$ and $7.7^{\circ } \times 29^{\circ }$ from an 100-nm wavelength tuning range. Also, to show the potential to further extend the spectral scan range, blazed diffractive elements are fabricated with high diffraction efficiency, which corresponds to a spectral scan range up to 40.3°. Based on the structure, a solid-state coherent LiDAR system is built. Three-dimensional imaging with mm-level range resolution is demonstrated.
By using narrow infrared (IR) beams, optical wireless communication (OWC) system can realize ultra-high capacity and high-privacy transmission. However, due to the point-to-point connection approach, a high-accuracy localization system and beam-steering antenna (BSA) are required to steer the signal beam to user terminals. In addition, to achieve link alignment in the receiver, the BSA needs to be within the limited receiver field of view (FoV). This problem greatly limits the practical application of high-capacity IR optical wireless communication and has not been well solved yet. In this paper, we proposed an indoor beam-steering IR OWC system with high-accuracy and calibration-free localization ability by employing a coaxial frequency modulated continuous wave (FMCW) light detection and ranging (LiDAR) system. In the meantime, benefit from the mm-level ranging accuracy of the LiDAR system, a feasible approach to deal with the link alignment issue for practical applications is firstly demonstrated. With the assistance of the LiDAR system, we experimentally achieved the localization of user terminals with a 0.038-degree localization accuracy, link alignment at the receiver and an error-free on-off keying (OOK) downlink transmission of 20 Gb/s in free space at 3-m distance is demonstrated.