Fu-Chang Chen

Fu-Chang Chen

Auto-generated profile, based on publicly available information

Fu-Chang Chen

School of Electronic and Information Engineering South China University of Technology Guangzhou China

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 December 2016 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
FCFu-Chang Chen
Fu-Chang Chen
HHHao-Tao Hu
Hao-Tao Hu
RLRun-Shuo Li
Run-Shuo Li
QCQing-Xin Chu
Qing-Xin Chu
MLMichael J. Lancaster
Michael J. Lancaster
For the requirements of efficient integration and simple fabrication, a new codesign approach for a microstrip filter with an antenna array with reduced sidelobe level is introduced in this communication. The microstrip patch antennas and the stub-loaded resonators are used to illustrate the synthesis of a bandpass filtering antenna array. By controlling the coupling strength between the resonators, a uniform or nonuniform power divider network can be obtained. A nonuniform power division is used to reduce the sidelobe level. The equivalent lumped circuit model is developed and analyzed in detail. Two types of eight-element filtering antenna array with uniform and tapered power-distribution among the elements have been designed. Simulated and measured results provide a good verification for the theoretical concepts.

9 October 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
JQJian-Feng Qian
Jian-Feng Qian
FCFu-Chang Chen
Fu-Chang Chen
YDYuehua Ding
Yuehua Ding
HHHao-Tao Hu
Hao-Tao Hu
QCQing-Xin Chu
Qing-Xin Chu
This paper presents a wide stopband filtering antenna element and its application in multi-input multi-output (MIMO) system. Microstrip terminated coupled lines (TCLs) and a rectangle patch are utilized to generate the filtering function. By varying the length of the parallel coupled lines and opencircuited stubs, multiple transmission zeros can be introduced in the spurious band. Appropriate positioning the location of these transmission zeros enables a wide harmonic suppression. To demonstrate the proposed method, a wide stopband filtering antenna is designed and further applied in a four-element MIMO array. The measured and simulated results agree well. The proposed MIMO antenna obtains an attenuation of 12.6 dB up to 6.6 times the center frequency.

31 May 2017 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
FCFu-Chang Chen
Fu-Chang Chen
JCJian-Feng Chen
Jian-Feng Chen
QCQing-Xin Chu
Qing-Xin Chu
MLMichael J. Lancaster
Michael J. Lancaster
This paper proposes a novel design approach for a filtering antenna, which contains an array of 4 by 2 waveguide aperture radiation elements. Coupling matrix theory is introduced in this paper to synthesize the multiple coupled-resonators circuit. Unequal amplitude excitation is applied to the $4 \times 2$ elements so as to obtain a low sidelobe level. To demonstrate the concept, an X-band antenna array is designed and fabricated using a three-layer waveguide structure. Measured results show that the filtering antenna array can achieve a gain of more than 15.58 dBi and a radiation efficiency of higher than 90% over the passband (9.91–10.1 GHz). The sidelobe level is −18.3 dB in the ${H}$ -plane and −21.1 dB in the ${E}$ -plane.

26 July 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
JQJian-Feng Qian
Jian-Feng Qian
FCFu-Chang Chen
Fu-Chang Chen
QCQing-Xin Chu
Qing-Xin Chu
QXQuan Xue
Quan Xue
MLMichael J. Lancaster
Michael J. Lancaster
A novel broadband patch antenna with electric- and magnetic-coupled elements and its application in multiple-input-multiple-output (MIMO) system is proposed in this communication. Unlike the conventional gap-coupled patch antennas, the electric and magnetic coupling between adjacent patches is considered and studied. Also, for improved understanding of the broadband nature of the proposed configuration, the phase relationships between patch elements are studied. Two- and three-patch prototypes are designed for validation of the concept, and the three-patch antenna is fabricated and measured showing a good agreement between the measured and simulated results. Considerable selectivity is observed in the results of the three-patch antenna because of the radiation nulls introduced by the electric and magnetic coupling. Apart from the broadband operation, the proposed antenna elements show promise for application in high-isolation MIMO systems due to their inherent band-reject characteristic when they are closely placed. For validation in this application, a four-element MIMO antenna is designed, fabricated, and measured. The measured results agree well with the simulated ones.

26 July 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
GLGen-Zhu Liang
Gen-Zhu Liang
FCFu-Chang Chen
Fu-Chang Chen
Hang YuanHang Yuan
Hang Yuan
KXKai-Ran Xiang
Kai-Ran Xiang
QCQing-Xin Chu
Qing-Xin Chu
A high selectivity and high efficiency filtering antenna is presented in this communication. A double-layer filtering patch antenna is first proposed, which can generate a radiation null due to the mixed electric and magnetic coupling between the two patches. By changing the length of the slot line on the patch, the position of the radiation null can be flexibly set at the lower band edge or upper band edge. Based on this mechanism, a three-layer patch antenna with two radiation nulls is designed. Two radiation nulls are introduced on both sides of the passband, consequently, a quasi-elliptic bandpass response can be obtained. Moreover, the proposed antenna features high efficiency since no extra filtering circuit is utilized. A prototype antenna operating at 1 GHz is designed, fabricated, and measured for validity verification. The measured results agree well with the simulated one, showing that the prototype antenna has a fractional impedance bandwidth of 16% (0.91–1.07 GHz), a flat passband gain response with peak value of 8.83 dBi, a high efficiency about −0.41 dB in the passband. The band-edge selectivity is highly improved by the radiation nulls near the passband edge.

12 February 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
KXKai-Ran Xiang
Kai-Ran Xiang
FCFu-Chang Chen
Fu-Chang Chen
QTQian Tan
Qian Tan
QCQing-Xin Chu
Qing-Xin Chu
In this article, we present a design method of high-selectivity filtering antennas based on a dual-probe feeding structure. The first stage of the filtering circuit consists of two or three coupled resonators which are then coupled to the radiating patch acting as the last resonator of the filter. Cross-coupling is used to obtain transmission zero, and thus the selectivity of the filtering antennas is improved. A cascaded triplet (CT) filtering patch antenna, which produces a radiation zero at the high-frequency edge of the passband, and a cascaded quadruplet (CQ) filtering patch antenna, which produces radiation zeros at both edges of the passband, are designed for verification. The process of designing the filtering patch antenna is given in detail. The designed CT filtering patch antenna has a bandwidth of 1.029-1.17 GHz and a radiation zero at 1.19 GHz. The designed CQ filtering patch antenna has a bandwidth of 1.029-1.17 GHz and two radiation zeros at 1.012 and 1.19 GHz, respectively. The peak gain of the CT filtering patch antenna is 9.35 dBi and that of the CQ filtering patch antenna is 9.16 dBi. A dual-polarized CQ filtering patch antenna is fabricated, showing a good performance in measurement.