Design of two novel orientation independent slot resonator based chipless RFID tags is proposed in this paper. These tags make use of multiple L-shaped slots of different lengths on a lossy substrate and are appropriate for item tracking and identifications. The data is encoded in the backscattered signal from the tag after its illumination. The first tag configuration includes multiple L-shaped slot resonators cascaded with each other. It exhibits wideband features and enables addition of extra resonators for encoding of additional data without increase in the tag size. The second configuration has alternate resonators on one side of the substrate while the remaining resonators, are inverted, and are on the other half of the substrate. It leads to reduced mutual coupling between the resonators, and hence an improved performance, and improved printing flexibility. The proof of concept is demonstrated through the design of tags in CST Microwave Studio and prototype development on Rogers 5880 substrate. Both the tags are compact, printed on 20 mm x 20 mm substrate, encode 8-bits in a bandwidth of 3 GHz and thus advance the state of the art significantly. An interesting feature of the proposed tags is the orientation independence and this is a very useful feature for applications such as tracking of items in a smart retail scenario where the products need to be read by the readers from any orientation.
The recent emergence of Radio Frequency Identification (RFID) applications have attracted the attention of all the stakeholders, namely developers, manufacturers, and end-users. In essence, RFID has permeated the broad spectrum of item tracking, identification, and sensing. Alternatively, it is safe to say that RFID has revolutionized item tracking, sensing, and monitoring mechanisms. However, RFID's proliferation often faces a roadblock due to its associated cost due to silicon-based integrated circuits. This aspect can be addressed by the emerging design techniques and performance enhancement approach adopted for the realization of Chipless RFIDs. This has catapulted the Chipless RFIDs at the forefront in recent years. The chipless RFID tag uses electromagnetic properties to store the information and eliminate memory chips. It is anticipated that the usage of Chipless RFIDs will increase by leaps and bounds in the coming years. Therefore, this paper discusses some of the critical applications that can be directly served by Chipless RFIDs. This paper also elaborates on the associated constraints which limit the mass deployment of the Chipless RFIDs. Furthermore, this paper throws some light on some of the exciting research directions for future development.
The architectures of two innovative compact orientation independent chipless radio frequency identification device (RFID) tags for emerging applications such as the internet of things are presented. These tags, when illuminated, generate resonant frequencies in the radar cross‐section backscattered spectrum, which are used to encode the data. These are based around L‐type resonators, which can be read from front and back using linear polarisation waves as they do not have the ground plane. The first tag design consists of L‐resonators in the lower triangular of the substrate, and thereby mutual coupling is increased as a reduction in the size. The second tag design incorporates alternate L‐resonators in both halves of the substrate and exhibits reduced mutual coupling and enhanced printing strength but with a reduction in bit density. The proposed concept is demonstrated through prototypes of 8‐bit chipless tags on Rogers substrate. These tags require very low bandwidth to encode 8‐bit and occupy a small board size of 20 mm × 20 mm, and these are considerable improvements in the development of chipless RFID.
RFID has permeated in wide-ranging applications that may eventually fall under the broad IoT umbrella. However, the adaption of RFID for commercial purposes of IoT-centric applications still faces numerous technical challenges due to its high cost. The Chipless RFID can become a boon considering its significantly reduced cost and tag complexity in this context. In this article, therefore, different aspects of the chipless RFID are discussed and analyzed, and a potential road map is explored for the effective seamless integration of chipless RFID in the amalgamated IoT. At first, a brief theoretical preliminary about the Chipless RFID is presented, and it is succeeded by the application’s specific roles of this emerging RFID in the wide variety of domains. Subsequently, the analysis of various physical parameters shows that chipless RFID technology can greatly broaden IoT’s horizon. It essentially shows that it has the potential to bring a paradigm shift in the way RFID can coexist with IoT. Finally, a section which briefs about the future directions is also included to throw some light on Chipless RFID’s direct fitment in the IoT.
24 February 2022 in IET Circuits, Devices & Systems
A frequency generator based on the forward coupler principle is proposed. The proposed design, intended for high‐frequency applications, uses Half‐Mode Substrate Integrated Waveguide structure to realise the forward coupler. It thus achieves compactness, requiring approximately half the area compared to Substrate Integrated Waveguide structures, and supports non Transverse Electromagnetic (TEM) functionality. The non‐TEM environment provides the flexibility to use the frequency generator for chipless Radio Frequency Identification readers in the sub‐GHz band and mm‐wave range. Full‐wave simulations and the subsequent measurements on a prototype developed on Rogers 3006 substrate performed for the forward coupler resonators and frequency generator validate the proposed design concept.
Novelty and state of the art are lacking in the work. An explanation of the experimental setup is not given; only equations are written. What the connection with the article is not justified.