As a novel plugging agent, re-crosslinkable preformed particle gels (RPPG) can re-crosslink in the formation to form a bulk gel, showing great application potential in fractured reservoirs. However, conventional RPPG often re-crosslink too rapidly, leading to premature gelation before reaching deep target zones. To address this issue, we introduced a labile crosslinker, polyethylene glycol diacrylate (PEGDA), to work synergistically with a stable crosslinker, N,N'-methylene-bis-acrylamide (MBA), and chromium acetate to construct a crosslinked network, thereby preparing a delayed re-crosslinkable preformed particle gel (DRPPG). At 80 ℃, the ester bonds in PEGDA gradually hydrolyze, progressively increasing the length of free dangling chains on the particle surface, thus achieving controlled delay of the re-crosslinking time. The re-crosslinking performance of DRPPG was quantitatively evaluated using a self-designed evaluation device. Experimental results showed that by adjusting the dosages of MBA and PEGDA, the onset of obvious re-crosslinking time (ORCT) of DRPPG can be effectively tuned from 3.5 h to 72 h. Environmental factors such as swelling ratio, temperature, pH, and salinity also significantly affect the delayed re-crosslinking performance. Based on the analysis of the re-crosslinking process and rheological characterization, a delayed re-crosslinking mechanism model for DRPPG was proposed. Fractured core plugging experiments indicated that DRPPG can maintain good particle dispersion and distribution during injection, and re-crosslink after aging, achieving a breakthrough pressure as high as 530 kPa, which is substantially higher than that of conventional RPPG. This study provides a theoretical basis and technical reference for the preparation of novel re-crosslinkable particle gels and their application in deep profile control.