This study evaluated two different adhesive systems (Adper Single Bond 2 – SB2; Palfique Bond – PALF) to bovine sclerotic dentin with and without dentin pretreatments. For this purpose, 200 incisors were randomly distributed into eight groups (n = 25), according to the pretreatment (none; diamond bur roughening – BUR; EDTA application – EDTA; and BUR + EDTA) and adhesive system (SB2 and PALF). A flat dentin area was obtained through wet polishing with 200, 320, 400, and 600-grit SiC paper after the teeth were embedded in chemically activated resin, with the exposed dentin surfaces parallel to the horizontal plane. Each dentin surface received two or three cylinders of flowable resin (Opalis Flow; FGM). The resin cylinders were made directly on the sclerotic dentin surface after each specific micro shear bond strength test (μSBS) treatment. The results were recorded, and the failure patterns were classified through stereomicroscopy. Parallelly, 16 bovine teeth were selected and treated according to each group, sectioned in a precision cutting machine, and analyzed using scanning electron microscopy. Results were analyzed by two-way ANOVA and Tukey’s test (α = 0.05). There were statistically significant differences among the μSBS values (p < 0.05). Groups with pretreatment showed values significantly higher (p < 0.05). Cohesive failure was prevalent within the adhesives. PALF produced thinner hybrid layers when compared to SB2, but diamond bur roughening was capable of enhancing its thickness. In conclusion, the pretreatments of sclerotic dentin evaluated in this study resulted in better μSBS results in both tested adhesives systems.
28 February 2022 in Brazilian Journal of Health Review
Este estudo avaliou a capacidade de molhamento e adaptação compósitos resinosos de três diferentes viscosidades às paredes cavitárias de preparos padronizados realizados em dentes bovinos simulando cavidades tipo Classe I de Black. Um molde realizado com silicone de adição foi feito de cada cavidade previamente à restauração para título de controle da capacidade de molhamento e adaptação. Com as restaurações finalizadas, os dentes foram submetidos à desmineralização de sua estrutura permitindo que a restauração fosse facilmente destacada para a sua avaliação. Os corpos de prova foram avaliados com o auxílio de um perfilômetro 3D. Dentre os grupos estudados o melhor desempenho foi da resina bulk fill flow. Os resultados sugerem que a viscosidade dos compósitos resinosos restauradores interfere diretamente na capacidade de molhamento e adaptação deles às paredes cavitarias e que devem ser considerados pelo menos como uma camada de aplicação inicial.