1 March 2023 in Geophysics
The Marchenko method can retrieve Green’s functions among virtual sources in the subsurface and receivers at the surface from single-sided reflection data. This process, called Marchenko redatuming, allows the estimation of the full-wavefield information in the inhomogeneous subsurface. The retrieved Green’s functions form the input for creating the subsurface image free of artifacts caused by internal multiples. However, when using the crosscorrelation imaging condition in Marchenko imaging, the shallower regions of the obtained image suffer from reduced resolution due to unwanted interference, which occurs in the crosscorrelation gathers at far offsets. With a simple model, we have found that the image resolution obtained using the crosscorrelation Marchenko imaging (CCMI) method is influenced by image position and the integral range of the crosscorrelation function. To overcome this problem, we develop an optimal aperture-bounded crosscorrelation imaging condition using only the constructive wavefields during integration. The optimal aperture is defined as an intercept at which the time difference between the first arrivals of up- and downgoing Green’s functions equals one wavelet period. The integration of the crosscorrelation function is then performed over the determined optimal range that varies with the image position rather than a fixed aperture. As a result, we exclude the unwanted destructive interference from the crosscorrelation gather, resulting in a high-resolution image. The effectiveness of our method has been validated with its applications to synthetic and field data tests.
26 February 2024 in IEEE Transactions on Geoscience and Remote Sensing
The Least Squares Reverse Time Migration (LSRTM) can obtain high resolution and true amplitude imaging results. However, LSRTM for full model domain data requires simulation throughout the entire model space, resulting in significant computational costs. In addition, the Born approximation, which is based on single scattering theory, can cause imaging artifacts by treating multiple reflections from the overburden as primary reflections. To address these issues, the Marchenko redatuming method can be used to separate the influence of the overburden. However, due to factors such as acquisition aperture, phase and amplitude errors can occur in far offset Marchenko redatumed data. Therefore, a prestack correlative LSRTM method based on Marchenko redatumed data is proposed for target-oriented imaging, which includes two key points. Firstly, the method aims to reconstruct the data recorded from surface onto the target datum using Marchenko redatuming theory to obtain the response without the influence of overburden. Secondly, by constructing the prestack normalized zero-lag cross-correlation error function, the optimal reflection coefficient model is found for each shot’s record, and the final imaging result is generated by stacking the optimal reflection coefficient model of all redatumed data, thereby alleviating the problem of the incoherent stacking at far offset in redatumed data, which reduces the imaging quality. Numerical examples demonstrate that the proposed method has higher computational efficiency and can provide imaging results with fewer artifacts.
23 June 2023 in IEEE Geoscience and Remote Sensing Letters
The inadequate resolution of cavity karst reservoir characterization is a key factor affecting the hydrocarbon production efficiency of ultra-deep marine carbonates. Full waveform inversion (FWI) using high-frequency seismic data can provide a higher resolution than conventional methods. However, computational efficiency limits its application. This paper proposed a target-oriented local FWI method for cavity karst reservoir characterization. Based on the wavefield injection and Marchenko redatuming methods, a local wavefield forward modeling operator is derived. It can obtain the local wavefield corresponding to the physical source at the surface. Based on this local wavefield reconstruction, an objective function of the local FWI is established. To enhance the reservoir boundaries in the inversion results, a stabilizing strategy that combines total variation and minimum support regularization is proposed. A synthetic data test demonstrates that the obtained model can well describe the cavity karst reservoir structures.