In this paper an algorithm for modal control of linear time-invariant (LTI) discrete system is proposed to improve the quality of the processes and achieve the desired stability degree of the system. For this purpose the suggested algorithm is calculating the feedback state vector for a single-input single-output (SISO) system so that the closed loop poles to be distributed into a predefined sector on the positive axis. As the calculated control signal delivered by the developed algorithm is a scalar variable it could be given the following name: scalar modal control (SMC) algorithm.
The literature review shows that there are not many examples of adaptive systems synthesis algorithms. The adaptive block is usually presented in the given structures but information of basic principles and adaptive algorithm implemented behind is hardly provided. The present material proposes a practical solution with accent to the synthesis of the adaptive structure of the modal state controller. The algorithms used for adaptive observation and modal control are preliminary set and developed. Auxiliary pulse-relay controller (PRC) is implemented for control purposes during the observation time, which control signal is not only dependent on the control error. It is programmed to ensure that for ii steps, if the control signal u(k) has been set to the lower/or higher level, it will switch for 1 step to the alternate level. This solution will guarantee sufficiently informative signal feed to the object input.
This paper presents non-recursive algorithm for adaptive observation of linear single-input single-output (SISO) time-invariant discrete systems based on least-squares method. The developed adaptive state observer estimates the parameters, initial and current state vector of the discrete linear system and is suitable for real-time working. Simulations are carried out in Matlab environment and provided in order to prove the algorithm performance.
1 April 2019 in International Journal of Agricultural and Environmental Information Systems
Advanced in the present article is a Two-step procedure designed on the methods of the least squares (LS) and instrumental variable (IV) techniques for simultaneous estimation of the three unknown parameters L∞, K and t0, which represent the individual growth of fish in the von Bertalanffy growth equation. For the purposes of the present analysis, specific MATLAB-based software has been developed through simulated data sets to test the operational workability of the proposed procedure and pinpoint areas of improvement. The resulting parameter estimates have been analyzed on the basis of consecutive comparison (the initial conditions being the same) between the results delivered by the two-step procedure for simultaneous estimation of L∞, K and t0 and the results obtained via the most commonly employed methods for estimating growth parameters; first, use has been made of the Gulland-and-Holt method for estimating the asymptotic length L∞and the curvature parameter K, followed by the von Bertalanffy method for estimation of t0.
30 November 2017 in International Journal of Engineering Research & Science