One of the main challenges of the metallurgical industry is the management of the principal waste generated in the production of castings, which is the waste foundry sand (WFS). Potential solutions include the use of WFS in civil construction due to its mineral origin and the high volume available to meet possible demand. This study analyzed the influence of WFS on the mechanical and hydraulic properties of pervious concrete paving blocks. The experimental stage involved mixtures with 0% (reference) and 100% replacement of quartz sand (QS) by WFS, in concrete with consumption of 350 kg/m3 and 450 kg/m3 of Portland cement. Cylindrical specimens, pavers, and pervious concrete slabs were submitted to water absorption, compressive strength, and determination of the permeability coefficient (k) tests. Analysis for physicochemical characterization of leachate samples of the studied concretes was also carried out. After the statistical analysis of the results, it was possible to conclude that the WFS did not change the mechanical (Rc; Rt) and hydraulic (k; absorption) properties of pervious concrete mixes (WFS1; WFS2) when compared to the reference mixes (QS1; QS2). The changes in the results of the physicochemical parameters are related to the higher consumption of Portland cement from mix 2, increasing hardness, total solids, and alkalinity.
Concrete is the most used construction material, which results in harmful impacts on the environment due to the consumption of natural resources. Hence the need to use alternative materials, e.g., waste from the construction sector and even from other production sectors. This context includes the development of concrete with sustainable functionality, such as pervious concrete with the incorporation of waste foundry sand (WFS), a waste generated by the foundry sector. However, there is a scientific gap focusing on the environmental viability of pervious concretes. In this sense, this study aims to evaluate the toxicity of pevious concretes with WFS, through germination tests with Eruca sativa (arugula) and Triticum aestivum (wheat) seeds. The statistical analysis of the results showed that there was no significant harmful effect from the incorporation of WFS on the germination rate for both seeds used. Regarding root growth, it was observed that WFS II concrete (>% Portland cement) had a lower impact on arugula seeds (more sensitive). Therefore, the pervious concrete with WFS developed was found to be safe in relation to phytotoxicity.