20 March 2024 in IEEE Transactions on Applied Superconductivity
The radial crimping process is a crucial step in fabricating stacked high-temperature superconducting (HTS) cable-in-conduit conductor (CICC) made with rare earth barium copper oxide (REBCO) HTS tapes for the application of large-scale HTS magnets at low temperatures. This paper presents theoretical research on the forming principle and correlated law of the radial crimping process for stacked HTS CICC. Firstly, a finite element model is developed to simulate the forming process of the conductor under the conditions of the radial crimping process steps. Subsequently, the changes in the wall thickness of the jacket, the stress-strain distribution of the conductor, and the deformation characteristics of the stacked tapes during the forming process are analyzed. Finally, by comparing the calculated results with the experimental ones, the effects of different crimping steps on the forming quality of the conductor are studied. This research can provide significant references for optimizing the manufacturing process of stacked HTS CICCs and improving the overall performance of the conductor.
6 February 2024 in IEEE Transactions on Applied Superconductivity
High temperature superconducting coated conductor carrying direct current (dc) presents a dynamic resistance under an external perpendicular alternating current (ac) magnetic field, which is far more than the E-J relation measured in a steady field and varies with the frequency and amplitude of the external magnetic field. This study proposes a numerical method coupling T-A formulation and element equivalent shunt circuit equation. Numerical results of dynamic resistance have been compared to previous experiments, T-A formulation using power law E-J relation and an analytical equation. The comparison shows a strong performance of our method across a wide range of frequencies and field magnitudes, including both high and low-frequency regimes. Additionally, it reveals the reason for the differences in experimental results and the other two methods.
30 December 2024 in IEEE Transactions on Applied Superconductivity
The current sharing process and increase in the electric field are closely related to the E-J relation during the quench of high-temperature superconductor (HTS). E-J power-law relation of the type E = Ec(J/Jc)n is widely used in modeling the dynamics of HTS, with Ec typically defined as 10−4 V/m, corresponding with the electric field when the current density J equals the critical current density Jc. This value is much lower than the electric field within a 40-μm-thick copper stabilizer carrying a current greater than 10 A, as well as the average electric field observed in the quenching zone during experiments. It means the current density is far greater than the critical current density when quench happens. The high ratio of J/Jc along with the E-J power-law relation brings difficulty in the convergence of the numerical model. This paper presented the comparison of the numerical simulation of the quench propagation problem in a single tape model with three nonlinearity E-J relations. The comparison reveals that one of these relations, in particular, significantly enhances the solvability and convergence of the quench model while resulting in smaller relative errors.
2 August 2024 in Superconductor Science and Technology
High temperature superconducting (HTS) tapes have crucial applications for generating high magnetic fields with minimal power input. Given a single tape has a limited current-carrying capacity, stacked tapes are common, fabricated through methods like solder soldering or epoxy impregnation requiring heat treatment. In this work, we have investigated the efficient region for vacuum heat treatment applicable of commercial HTS tapes, analysed the thermal degradation principles and accordingly proposed a controlled heat treatment process for stacked HTS tapes to achieve more precise regulation of the critical current ( ). This heat treatment process was explored using a specialized multi-temperature zone vacuum system. Critical parameters in this process include heat treatment temperature, duration and pressure on the tape. A series of experiments were conducted at 77 K in a self-field to investigate how these parameters affect the superconductivity performance of stacked HTS tapes. Based on the experimental results, an optimal heat treatment process has been proposed. Under the current process, with the heat treatment temperature set at 200 °C, duration at 20 min, and pressure on the tape at 12 MPa, the samples exhibit favourable properties characterized by a smooth and neat appearance without defects such as pinholes or false soldering, and the superconductivity performance can be consistently maintained at more than 97%. The obtained measurements were compared with simulated results, demonstrating an error margin within 0.5%. Moreover, precise control of is achieved, tailored to tape and stacking specifications, allowing manageable degradation as required. This heat treatment process for stacked HTS tapes holds significant importance, especially in the context of designing cable-in-conduit conductors fabricated with stacked HTS tapes. It serves as a valuable reference for further advancements in this field.
4 December 2025 in IEEE Transactions on Applied Superconductivity
This work investigates a hybrid passive screen integrating superconductors and ferromagnets. The screening structure consists of multiple superconducting bulks, stacked closed-loop eye-shaped coated conductors, and a ferromagnetic (FM) sheet. The stacked coated conductors are concentrically arranged around the bulks, with the FM sheet positioned on the upper surface of the bulks. The screening effects are examined through experimental measurements and finite element calculations. We investigate superconducting screens of various structures, firstly, revealing that the combination of superconductors provides superior screening performance compared to using bulks alone. Furthermore, partial reversal of the tapes’ directions was applied to optimize geometrical asymmetry. The superconducting-FM hybrid screen was then tested, achieving a substantial reduction in residual magnetic flux density (up to 38%) in the gap region while simultaneously improving field uniformity. Importantly, the established numerical model enables further exploration and optimization of the screen, allowing for expanded screening volume and operation at higher magnetic field levels.
3 November 2025 in IEEE Transactions on Applied Superconductivity
The normal zone propagation velocity (NZPV) in high-temperature superconductors (HTS) is two to three orders of magnitude lower than that in low-temperature superconductors (LTS). This slow quench propagation poses a critical challenge for quench detection in HTS applications. Fiber Bragg Grating (FBG) sensors have demonstrated potential as cryogenic sensors for quench detection in HTS applications. But determining an appropriate threshold value for the central wavelength shift (Δλ) in quench detection remains a question to be addressed. In this paper, both single superconducting tapes and stacked tapes, which serve as the fundamental building blocks of HTS cables, are investigated. The time delay of the FBG sensor is demonstrated to be shorter than that of voltage taps when a hotspot occurs at the grating location. The Δλ corresponding to quench temperature—the threshold examined in this study—decreases as the distance from the hotspot increases. The FBG can effectively respond to a quench event more quickly than voltage, when the distance from the hot spot is less than 10 mm.