Addressing limitations in conventional non-isolated three-port converters (TPCs) for photovoltaic-energy storage (PV-ES) systems—such as restricted voltage range, high hard switching losses, and soft-switching performance dependent on load power, this paper proposes a reconfigurable, high power density, lossless non-isolated TPC. By integrating a dual-output architecture with the concept of power-path reconfiguration, single-stage wide-voltage-range energy conversion among the PV port, ES port, and load port is achieved. Combining an inductor series mechanism and switch parallel capacitor design, a hybrid reconfigurable quadrilateral modulation method for inductor current is proposed. This enables TPC to achieve full-load-range zero-voltage switching (ZVS) across a wide input voltage range of 29.43V to 80V, increasing the maximum power transfer capability to 512.99W. Furthermore, aiming to minimize the root-mean-square inductor current, the optimal duty cycle combinations for achieving full-load-range soft-switching in multiple operating modes are determined, significantly reducing switch conduction losses and inductor losses. Experimental results demonstrate that the proposed TPC achieves full-range ZVS in all three modes: single-input dual-output, dual-input single-output, and single-input single-output. It achieves a peak efficiency of 97.1% at rated power with voltage ripple below 0.71%. This work provides theoretical and technical support for efficient energy management in PV-ES systems.
13 March 2026 in IEEE Transactions on Power Electronics
Conventional non-isolated three-port converters (TPCs) suffer from port voltage constraints and multi-stage power conversion, leading to limited efficiency and operating range. This paper presents a universal TPC architecture construction that systematically integrates missing power paths into classical P1S3 and P2S2 structures to enable a unified and flexible topology derivation platform. Utilizing basic switching cells, six novel non-isolated TPCs with full-port wide-range capability are derived. Among them, three feature a P1S2 architecture, which ensures single-stage power conversion in all power flow modes, achieving all-mode high efficiency—defined as consistently high efficiency across every operational mode. For the selected optimal topology TPC–IV, a competitive control strategy between an output voltage regulator and a battery discharge regulator is developed to enable smooth power distribution and stable operation. Experimental validation using a 150W prototype shows that TPC–IV achieves independent voltage regulation across all ports over a wide voltage range, with efficiencies from 91.06% to 97.97% over varying voltages and from 92.05% to 97.83% under different load levels. The close alignment between experimental and theoretical results confirms the correctness and superior performance of the proposed approach.