The Multi-Bend-Achromat (MBA) structure of the Diffraction-limited Synchrotron Light Source (DLSR) makes the dynamic range of its injection significantly smaller, thus posing a more demanding challenge for the stable injection of beams. To investigate the possible instabilities during the injection process, multi-anode photomultiplier tubes (MAPMT) are used in bunch-by-bunch measurements to obtain the transverse positions and transverse profiles of the bunched beams as they are injected. However, the data processing time witnessed in prior measurements posed a significant challenge in obtaining this information in time, thus failing to meet the stringent demands of online measurements. Consequently, this paper proposes one computing module, engineered to enhance the speed of bunch-by-bunch measurements of transverse positions and profiles. This solution is capable of delivering measurement results for each bunch in the filling pattern, all within the specified injection period.
1 December 2022 in Review of Scientific Instruments
Multi-dimensional bunch-by-bunch (BbB) measurements are an efficient tool to research beam dynamics induced by wakefields in storage ring light sources, yet they can have data misplacement problems on high-speed acquisition boards. Hence, a data synchronization module (DSM) was designed to solve the issue of data misplacement. We analyzed different synchronization states in the DSM and conducted testing of the DSM on a field programmable gate array to evaluate its performance. Test results indicate the synchronized DSM data from multiple high-speed acquisition boards corresponds to the bucket number in the bunch filling pattern. We found that the resolution of the longitudinal phase in three-dimensional BbB measurements can be improved with DSM and propose a scheme for multi-dimensional BbB measurements. In this paper, we will detail the structure of DSM and its limitations.