Silicon photonics technology has attracted considerable attention these days. However, the low coupling efficiency due to the difference in spot size between silicon photonic (SiPh) chips and single-mode fibers (SMFs) remains a challenging issue. We have already proposed a unique combination of a microlens and a pillar on the facet of SMF. However, the pillar may have difficulty in keeping a single mode for a signal beam of 1. 55 μ m wavelength due to air cladding. In this study, we clarified the length of the pillar that can support the single mode through simulations and experiments. By the optimum designing, the spot size as the same level as the SiPh chip was obtained. We could show that our coupling device provides high coupling efficiency with a test sample of SiPh chip, and this device also can be applied to multi-core fibers.
Silicon photonics (SiPh) technology has gained considerable attention as a result of the growing demand for high-bit-rate optical interconnections. Low coupling efficiencies, resulting from the difference in spot size between silicon photonic chips and single-mode fibers (SMFs), remains a challenging issue. To solve this problem, we fabricated a novel, to the best of our knowledge, polymer spot size expander (SSE) device on the end face of a silicon chip. The fabrication of SSEs using self-written waveguide technology and a dipping method using UV-curable resin was highly reproducible. The spot size of the original 3.83 µm of the SiPh chip was expanded to approximately 7.82 µm at a wavelength of 1.55 µm, and the maximum coupling efficiency achieved with the SMF was –0.88 dB. In addition, the –3 dB tolerance of the coupling efficiency along the vertical optical axis was ±4.4 µm.
Silicon photonics technology has attracted considerable attention because of the growing need for high-bit-rate optical interconnections. The low coupling efficiency resulting from the difference in spot size between silicon photonic chips and single-mode fibers remains a challenging issue. This study demonstrated a new, to the best of our knowledge, fabrication method for a tapered-pillar coupling device using a UV-curable resin on a single-mode optical fiber (SMF) facet. The proposed method can fabricate tapered pillars by irradiating only the side of the SMF with UV light; therefore, high-precision alignment against the SMF core end face is automatically achieved. The fabricated tapered pillar with resin cladding has a spot size of 4.46 µm and a maximum coupling efficiency of −0.28 dB with a SiPh chip.
1 June 1999 in Journal of Electron Spectroscopy and Related Phenomena
We have proposed a volumetric 3D display in which cross-sectional images are projected on a rotating helical screen. One of challenges of this method is an existence of invisible regions generated depending on observation angle. Invisible region is determined as the sum of dark region as a result of oblique incidence of the projected light on the screen and blind region as a result of blocking light paths to the viewpoint by the screen body. The larger invisible region was shown against the higher viewpoint to the helical screen. It was also shown that invisible region mainly located in the distant side from the viewpoint and in the neighboring region to the rotation axis of the screen. Our evaluation results show that the cylindrical display volume provided by a helical screen offers enough visible region at the viewpoint side and the periphery: indispensable regions for 3D displays.