6 December 2024 in Science Advances
Sensitivity is often the Achilles’ heel of liquid-state nuclear magnetic resonance (NMR) experiments. This problem is perhaps most pressing at the lowest fields (e.g., 80-MHz 1 H frequency), with rapidly increasing access to NMR through benchtop systems, but also sometimes for higher-field NMR systems from 300 MHz to 1.2 GHz. Hyperpolarization by dissolution dynamic nuclear polarization (dDNP) can address this sensitivity limitation. However, dDNP implies massive and complex cryogenic and high-field instrumentation, which cannot be installed on the bench. We introduce here a compact helium-free 1-T tabletop polarizer as a simple and low-cost alternative. After freezing and polarizing the frozen analyte solutions at 77 K, we demonstrate 1 H signal enhancement factors of 100, with rapid 1-s buildup times. The high polarization is subsequently transferred by 1 H→ 13 C cross polarization (CP) to 13 C spins. Such a simple benchtop polarizer, in combination with hyperpolarizing solid matrices (HYPSOs), may open the way to replenishable hyperpolarization throughout multiple liquid-state NMR experiments.
11 July 2024 in Physical Chemistry Chemical Physics
Hyperpolarization by dissolution dynamic nuclear polarization (dDNP) provides the opportunity to dramatically increase the weak nuclear magnetic resonance (NMR) signal of liquid molecular targets using the high polarization of electron radicals. Unfortunately, the solution-state hyperpolarization can only be accessed once since freezing and melting of the hyperpolarized sample happen in an irreversible fashion. A way to expand the application horizon of dDNP can therefore be to find a recyclable DNP alternative. To pursue this ambitious goal, we recently introduced the concept of recyclable hyperpolarized flow (HypFlow) DNP where hyperpolarization happens in porous hyperpolarizing solids placed in a compact benchtop DNP polarizer at a magnetic field of 1 T and a temperature of 77 K. Here we aim to optimize the radical concentrations immobilized in hyperpolarizing solids with the objective of generating as much polarization as possible in a timeframe (<1 s) compatible with future recyclable DNP applications. To do so, the solid-state DNP enhancement factors, build-up rates and DNP spectra of different hyperpolarizing solids containing various nitroxide radical loadings (20–74 μmol cm−3) are compared against the DNP performance of varying nitroxide concentrations (10–100 mM) solvated in a glassy frozen solution. We demonstrate that in <1 s, polarization enhancement goes up to 56 and 102 with surface-bound and solvated radicals, respectively, under the optimized conditions. For the range of nitroxide concentrations used cross effect DNP seems to be the dominant mechanism under benchtop conditions. This was deduced from the electron paramagnetic resonance (EPR) lineshape of TEMPOL investigated using Q-band EPR measurements.
31 October 2024 in Angewandte Chemie International Edition
15 April 2025 in The Journal of Chemical Physics
A sensitivity increase of two orders of magnitude in proton (1H) and carbon (13C) spins via dynamic nuclear polarization (DNP) has been accomplished recently using a compact benchtop DNP polarizer operating at 1 T and 77 K. However, the DNP mechanisms at play at such a low magnetic field and high operating temperature are still not fully elucidated. A deeper understanding of the dominant polarization transfer mechanisms between electrons and 1H and 13C spins under these benchtop conditions is, therefore, required if one wants to devise strategies to boost sensitivity further. In this study, we found that DNP is generally dominated by solid effect (two-spin and three-spin) for narrow electron paramagnetic resonance (EPR) line radicals (15 mM trityl OX063) and cross effect for broad EPR line radicals (50 mM TEMPOL). For both radicals, the dominant DNP mechanisms were investigated varying the microwave frequency and measuring the 1H and 13C DNP enhancement factors to obtain 1H and 13C DNP spectra. The impact of varying the microwave power on the 1H DNP buildup times and the 1H nuclear spin relaxation times were important as well to distinguish between solid effect and cross effect DNP. Finally, time-resolved electron saturation simulations under continuous microwave irradiation could replicate the experimental 1H and 13C DNP spectra at 1 T and 77 K for both radicals considering their electron relaxation properties. Only for trityl OX063, the 13C DNP spectra showed additional DNP maxima compared to the simulations. This has been attributed to methyl rotor induced 1H–13C heteronuclear cross relaxation in [1–13C] acetate present at 1 T and 77 K.
5 May 2025 in Chemistry–Methods
Dissolution dynamic nuclear polarization (dDNP) has emerged as a powerful technique to address the inherent sensitivity limitations in nuclear magnetic resonance imaging and spectroscopy. The technique relies on the use of stable paramagnetic polarizing agents that act as a source of hyperpolarization but unfortunately, their presence contaminates the sample and significantly enhances paramagnetic relaxation of the hyperpolarized solutions. In the last decade, novel sample formulations have been proposed to combat this issue, including silica‐based hybrid polarizing solids (HYPSO), which have enabled the production of contamination‐free hyperpolarization. Herein, a new generation of polarizing solids with pore diameters increased from 4 up to 28 nm is presented. Compared to the previously described HYPSOs with smaller pore sizes of 4 nm, larger pores ultimately achieve the ambitious contradictory goals of 1) providing rapid and high solid‐state polarization and improving cross‐polarization efficiency, while 2) decreasing hyperpolarization losses upon melting, transfer, and filtration, and 3) reducing the overall concentration of the polarizing agent by a factor of 2. These HYPSO materials can be used in virtually any existing dDNP settings without modification, apart from the sole addition of an in‐line commercial filter to retain the HYPSO powder upon dissolution and transfer.
10 October 2024 in ChemRxiv
Dissolution dynamic nuclear polarization has emerged as a powerful technique to address the inherent sensitivity limitations in nuclear magnetic resonance imaging and spectroscopy. The technique relies on the use of stable paramagnetic polarizing agents that act as a source of hyperpolarization but unfortunately their presence contaminates the sample and significantly enhances paramagnetic relaxation of the hyperpolarized solutions. In the last decade, novel sample formulations have been proposed to combat this issue, including silica-based hybrid polarizing solids (HYPSO), which have enabled the production of contamination-free hyperpolarization. Here, we present a new generation of polarizing solids with pore diameters increased from 4 nm up to 28 nm. Compared to the previously described HYPSOs with smaller pore sizes of 4 nm, larger pores ultimately achieve the ambitious contradictory goals of i) providing rapid and high solid-state polarization and improving cross-polarization efficiency, while ii) decreasing hyperpolarization losses upon melting, transfer, and filtration, and iii) reducing the overall concentration of the polarizing agent by a factor of 2. These HYPSO materials can be used in virtually any existing dDNP settings without modification, apart from the sole addition of an in-line commercial filter to retain the HYPSO powder upon dissolution and transfer.