The research of the interaction between bacteria-surface has great importance for titanium biomedical applications once microorganisms offer risks because promoting implant loss. Therefore, study bacterial adhesion and colonization on titanium is interesting because are principal factors infections pathogeny on biomaterials. In this study, commercial grade II titanium was submitted to nitriding treatment to plasma at 2.2 mbar, using gas mixtures of 80% hydrogen (H2) and 20% nitrogen (N2) during 1 hour and 3 hour. The surfaces were physically and chemically characterized. In order to evaluate bacterial response, the surfaces were exposed to Pseudomonas aeruginosa. The titanium surface modified in nitriding plasma, although exposes a higher roughness as compared with untreated samples, exhibited lower bacterial growth. The nitrided sample for 3 hour exhibited the higher amount of TiN phase and the higher concentration of atomic nitrogen on surface and lower bacterial adhered count. These results were confirmed by scanning electron microscopy. Based on these results can be said to the thermochemical treatment of plasma nitriding on titanium samples results a significant reduction of adherence of Pseudomonas aeruginosa. It was found that the Ti surface nitrided offers significant reduction of bacterial adherence which prevent biofilm formation and offersing lower risk of infection and implant remotion.
Cotton fabrics with zinc oxide (ZnO) coating are of significant interest due to their excellent antibacterial performance. Thus, they are widely in demand in the textile industry due to their medical and hygienic properties. However, conventional techniques used to deposit ZnO on fabric require long processing times in deposition, complex and expensive equipment, and multiple steps for deposition, such as a separate process for nanoparticle synthesis and subsequent deposition on fabric. In this study, we proposed a new method for the deposition of ZnO on fabric, using cathodic cage plasma deposition (CCPD), which is commonly used for coating deposition on conductor materials and is not widely used for fabric due to the temperature sensitivity of the fabric. The effect of gas composition, including argon and a hydrogen–argon mixture, on the properties of ZnO deposition is investigated. The deposited samples are characterized by XRD, SEM, EDS, photocatalytic, and antibacterial performance against Staphylococcus aureus and Pseudomonas aeruginosa bacteria. It is observed that ZnO-deposited cotton fabric exhibits excellent photocatalytic degradation of methylene blue and antibacterial performance, specifically when a hydrogen–argon mixture is used in CCPD. The results demonstrate that CCPD can be used effectively for ZnO deposition on cotton fabric; this system is already used in industrial-scale applications and is thus expected to be of significant interest to garment manufacturers and hospitals.