26 January 2018 in ACS Applied Nano Materials
8 December 2020 in Nanoscale Horizons
This article focuses on state-of-the-art technologies used in the research on materials, devices and processes to achieve high-performance QD-LEDs.
26 June 2020 in ACS Applied Materials & Interfaces
19 March 2020 in Chemistry of Materials
29 June 2022 in Journal of Materials Chemistry C
Printed quantum dot (QD) light emitting diodes (QLEDs) over a large scale have received much interest in the last decade owing to the demand for the next generation of self-emissive large-area displays. To realize printing technology for QLEDs, a pioneering study suggested using a co-solvent system or a polymer additive in CdSe-based QLEDs. However, limitations on printed QLEDs with eco-friendly QDs, including the selection of ink solvent, environmental degradation of QDs in the air by temperature and O2/H2O level, and viscosity, make it difficult to achieve higher luminescence and external quantum efficiency (EQE) than that of ionic-bonded Cd-based QDs. Herein, we design an air-processable and stable ink with a photoinitiator (PI) mediating cross-linkage between eco-friendly QDs for inkjet-printed QLEDs. Once QD inks with a PI are deposited on the desired surface, their film polymerizes in situ through radical formation induced by ultraviolet (UV) exposure. Cross-linking reactions between ligands in the QDs reduce the distances between them, leading to flattening of the surface and enhancement of environmental stability in air. Printed InP-based green QLEDs demonstrated maximum luminescence values of 3600 cd m−2 at 10 V on ITO/glass for the very first time. Finally, large-scale InP red/green/blue QLEDs directly printed with a bird image were fabricated on the flexible substrate.
19 August 2020 in ACS Omega
We report on the design, fabrication, and characterization of heterostructure In-Zn-O (IZO) thin-film transistors (TFTs) with improved performance characteristics and robust operation. The heterostructure layer is fabricated by stacking a solution-processed IZO film on top of a buffer layer, which is deposited previously using an electron beam (e-beam) evaporator. A thin buffer layer at the dielectric interface can help to template the structure of the channel. The control of the precursors and of the solvent used during the sol–gel process can help lower the temperature needed for the sol–gel condensation reaction to proceed cleanly. This boosts the overall performance of the device with a significantly reduced subthreshold swing, a four-fold mobility increase, and a two-order of magnitude larger on/off ratio. Atomistic simulations of the a-IZO structure using molecular dynamics (both classical and ab initio) and hybrid density functional theory (DFT) calculations of the electronic structure reveal the potential atomic origin of these effects.