1 July 2015 in Physics of Plasmas
The Primary Test Stand (PTS) developed at the China Academy of Engineering Physics is a 20 TW pulsed power driver, which can deliver a ∼10 MA, 70 ns rise-time (10%–90%) current to a short-circuit load and has important applications in Z-pinch driven inertial confinement fusion and high energy density physics. Preliminary results of tungsten wire-array Z-pinch experiments on PTS are presented. The load geometries investigated include 15-mm-tall cylindrical single and nested arrays with diameter ranging from 13 mm to 30 mm, consisting of 132–300 tungsten wires with 5–10 μm in diameter. Multiple diagnostics were fielded to characterize the x-ray radiation from wire-array Z pinches. The x-ray peak power (∼50 TW) and total radiated energy (∼500 kJ) were obtained from a single 20-mm-diam array with 80-ns stagnation time. The highest x-ray peak power up to 80 TW with 2.4 ns FWHM was achieved by using a nested array with 20-mm outer diameter, and the total x-ray energy from the nested array is comparable to that of single array. Implosion velocity estimated from the time-resolved image measurement exceeds 30 cm/μs. The detailed experimental results and other findings are presented and discussed.
1 April 2018 in Physics of Plasmas
In this paper, we analyze theoretically the magneto-Rayleigh–Taylor instability driven by a rotating magnetic field. Slab configurations of finite thickness are treated both with and without using the Wenzel–Kramers–Brillouin approximation. Regardless of the slab thickness, the directional rotation of the driving magnetic field contributes to suppressing these instabilities. The two factors of the finite thickness and directional rotation of the magnetic field cooperate to enhance suppression, with the finite thickness playing a role only when the orientation of the magnetic field is time varying. The suppression becomes stronger as the driving magnetic field rotates faster, and all modes are suppressed, in contrast to the case of a non-rotating magnetic field, for which the vertical mode cannot be suppressed. This implies that the dynamically alternate configuration of a Theta-pinch and a Z-pinch may be applicable to the concept of Theta-Z liner inertial fusion.
1 May 2018 in AIP Advances
In this paper, a relaxation magnetohydrodynamic model is used to study magnetic reconnection phenomena in pulsed-power-driven Z-pinch inverse wire arrays. We focus on certain characteristics of two distinct modes that differ by resistivity. A magnetic field alignment that is both anti-parallel and open is created in high-resistivity mode. This produces a pronounced slow/standing shock wave and outflows can be accelerated to super-magnetosonic velocities. In low-resistivity mode, the entire magnetic field is closed and there is no pronounced slow/standing shock wave. The outflow velocity along the neutral line is accelerated to magnetosonic velocities between the two magnetic islands, but slows afterwards. It is difficult to achieve steady or quasi-steady magnetic reconnection in pulsed-power-driven Z-pinch inverse wire arrays.
1 May 2012 in Chinese Physics B
1 January 2014 in AIP Conference Proceedings
The preliminary experiments of wire array implosion were performed on PTS, a 10 MA z-pinch driver with a 70 ns rise time. A set of diagnostics have been developed and fielded on PTS to study pinch physics and implosion dynamics of wire array. Radiated power measurement for soft x-rays was performed by multichannel filtered x-ray diode array, and flat spectral responses x-ray diode detector. Total x-ray yield was measured by a calibrated, unfiltered nickel bolometer which was also used to obtain pinch power. Multiple time-gated pinhole cameras were used to produce spatial-resolved images of x-ray self-emission from plasmas. Two time-integrated pinhole cameras were used respectively with 20-μm Be filter and with multilayer mirrors to record images produced by >1-keV and 277±5 eV self-emission. An optical streak camera was used to produce radial implosion trajectories, and an x-ray streak camera paired with a horizontal slit was used to record a continuous time-history of emission with one-dimensional spatial resolution. A frequency-doubled Nd:YAG laser (532 nm) was used to produce four frame laser shadowgraph images with 6 ns time interval. We will briefly describe each of these diagnostics and present some typical results from them.
1 January 2013 in Acta Physica Sinica
讨论了Z箍缩内爆产生的低频电磁脉冲的辐射特性. Z箍缩驱动金属丝阵或固体套筒高速内爆,部分磁能通过与负载的运动耦合而向外辐射. 理论结果表明,电磁脉冲辐射功率由电流和内爆轨迹共同决定. 在中国工程物理研究院流体物理研究所的初级实验平台上开展了负载电流为7 MA,10%–90%上升时间65 ns的丝阵Z箍缩实验,根据实验测得的电流和内爆轨迹得到了电磁脉冲的辐射功率和频谱. 电磁脉冲峰值功率约为1 GW,能量约为0.5 J,能量转换效率约为10-7;峰值频率位于20–70 MHz,具有较宽的辐射频谱. 电磁脉冲辐射参数远小于软X射线辐射参数(峰值功率为50 TW,能量为0.5 MJ). 在弱相对论条件下,电磁脉冲辐射功率近似地正比于电流的6次方,随电流急剧增大. 软X射线辐射是丝阵Z箍缩过程中的主要能量转换形式,本文的研究结论表明,在更高的驱动电流下,电磁脉冲辐射将提供另一种重要的能量转换途径,势必会对诊断设备造成严重影响;此外,这类强电磁脉冲在其他领域也具有潜在的应用价值.