10 May 2019 in Journal of the Institute of Brewing
The starch in the grains of legumes, such as faba bean (Vicia faba L.), offers an environmentally sustainable raw material for the brewing industry as their entire nitrogen fertiliser requirement can be provided by the natural process of biological nitrogen fixation. Faba bean is, therefore, distinguished from species such as spring barley (Hordeum vulgare L.), which require large amounts of synthetic nitrogen fertiliser. Consumer analysis of beer produced with faba bean as an adjunct compared with barley malt beers has not previously been assessed. This study evaluated the potential of beers brewed using 30% (w/w) dehulled bean (kernel) flour as an adjunct to malted barley, using a series of quantitative sensory tests. The first, a blind acceptance test with inferred preference, found no statistically significant difference in the taste score of the bean kernel flour adjunct beer when compared with conventional beer. In the second acceptance test, the knowledge that the beer was produced using beans did not affect the overall consumer impression of the beer, regardless of how this information was presented. These results suggest that the use of faba beans in brewing does not impact negatively on the taste or acceptability of the resultant beer. © 2019 The Institute of Brewing & Distilling
28 December 2020 in Journal of the Institute of Brewing
Pulse (Fabaceae) grains, such as peas and beans, are derived from crops that are usually cultivated in the absence of mineral nitrogen fertiliser as these crops can obtain their nitrogen requirement naturally from the air via biological nitrogen fixation. Therefore, pulses present a significantly lower greenhouse gas (GHG) footprint than crops demanding nitrogen fertiliser, whilst also offering significant quantities of starch for the brewing and distilling industries. Mitigation of agriculture derived GHG emissions through utilisation of pulses can have a positive environmental impact. To this end, the potential of exploiting dry, dehulled faba bean (Vicia faba L.) kernel flour as an adjunct for beer production was evaluated. The impact of different temperature regimes and commercial enzymes were assessed for their effect on wort: viscosity; run‐off rate; primary amino nitrogen content and, fermentability. Faba beans demonstrated insufficient endogenous enzyme capacity for starch conversion and generated a viscous wort. However, using a stepped temperature mashing regime and exogenous enzyme additions, the faba bean wort was comparable in processability and fermentability to that of 100% malted barley wort. The faba based beer and co‐product qualities demonstrate the environmental, nutritional and commercial potential of pulses in brewing. © 2020 The Authors. Journal of the Institute of Brewing published by John Wiley & Sons Ltd on behalf of The Institute of Brewing & Distilling
21 August 2020 in Journal of the American Society of Brewing Chemists
The potential to utilize low nitrogen barley for production of distilling quality malt was studied. This presents an opportunity to reduce the environmental impact of nitrogen fertilizer applications. Malting barley (cv. Octavia) was grown without the application of inorganic nitrogen fertilizer, to produce grain with a relatively low nitrogen concentration (1.16%, dry weight basis). Following micro-malting trials, dextrinizing units (58 DU) obtained from low nitrogen malt were much higher than a typical specification of 45 DU for malt with a conventional nitrogen concentration (<1.5%). A higher soluble nitrogen ratio (SNR) or index of modification (IoM) of 49 indicated greater modification of the low nitrogen barley, resulting in higher extract released into the wort. Additionally, much lower levels of β-glucan were found in low nitrogen malt wort (64 mg/L compared with over 100 mg/L in wort of conventional nitrogen malt). Low nitrogen malt also produced higher predicted spirit yields following wort fermentation and wash distillation. These findings indicate that lower nitrogen concentration barley can be processed without negatively impacting malt quality for distilling applications. The implication of these findings to help realize more environmentally sustainable production of barley for malting and use in distilling is discussed.
2 November 2022 in Journal of Environmental Management
The number of micro-scale spirit distilleries worldwide has grown considerably over the past decade. With an onus on the distillery sector to reduce its environmental impact, such as carbon emissions, opportunities for increasing energy efficiency need to be implemented. This study explores the potential environmental benefits and financial gains achievable through heat recovery from different process and by-product streams, exemplified for a Scotch whisky distillery, but transferrable to micro-distilleries worldwide. The eco-efficiency methodology is applied, taking into account both climate change and water scarcity impacts as well as economic performance of alcohol production with and without heat recovery. A Life Cycle Assessment, focusing on climate change and water scarcity, is combined with a financial assessment considering investment costs and the present value of the savings over the 20-year service life of the heat recovery system. The proposed heat recovery systems allow carbon emission reductions of 8-23% and water scarcity savings of 13-55% for energy and water provision for 1 L of pure alcohol (LPA). Financial savings are comparatively smaller, at 5-13%, due to discounting of the future savings - but offer a simple payback of the investment costs in under two years. The eco-efficiency of the distillery operations can be improved through all proposed heat recovery configurations, but best results are obtained when heat is recovered from mashing, distillations and by-products altogether. A sensitivity analysis confirmed that the methodology applied here delivers robust results and can help guide other micro-distilleries on whether to invest in heat recovery systems, and/or the heat recovery configuration. Uptake should be enhanced through increased information and planning support, and in cases where the distillery offers insufficient heat and water sinks to use all pre-warmed water, opportunities to link with a heat sink outside the distillery are encouraged. A 10% reduction in heating fuel use through heat recovery has the potential to save 47 kt of CO2 eq. or £7.4 M per annum in United Kingdom malt whisky production alone, based on current fuel types used and current prices (2021).