The conceptual foundations, as well as the functional and algorithmic structure of an expert system for selecting the optimal composition of a multicompone
This article discusses the procedure regarding the coefficient prediction of burden element distribution between smelting products based on integral parame
1 January 2024 in Fundamental and applied problems of ferrous metallurgy
The article discusses the results of heat and power and exergy calculations of the possibilities of new and existing technologies for reducing carbon dioxide emissions and coke consumption, increasing pig iron production by injecting various fuel additives into the furnace – pulverised coal, hydrogen, fuel oil, natural gas, coke oven and carbon monoxide, using metal additives, increasing the blast temperature, heat losses and improving gas distribution in the blast furnace. The calculations were performed using a mathematical model of the complete energy balance of blast furnace smelting developed at the Iron and Steel Institute of National Academy of Sciences of Ukraine, and the impact of the potential of new and existing technologies on reducing CO2 emissions and technical and economic indicators of blast furnace smelting was assessed with a wide range of changes in the consumption of fuel additives and their combinations, the use of metal additives and changes in the technological parameters of the blast furnace. The study results showed that CO2 emissions in blast furnace production can be reduced by 25-30% by making changes to blast furnace technology and depend on investments, the raw material and energy base of the steelmaker, and the level of existing blast furnace technology. The influence of low-cost measures to increase blast temperature, use clean metal additives, reduce heat losses and improve gas distribution in the blast furnace on the reduction of carbon dioxide emissions and technical and economic indicators of blast furnace melting is considered. The limit values for the injection of various fuel additives into a blast furnace have been determined, which are determined by the following factors: the degree of direct reduction of iron, theoretical combustion temperature, the presence of industrial oxygen, and the temperature of the top gas. The results can be useful for determining the economic feasibility of a particular measure to reduce CO2 emissions in blast furnace production.