Centre for Autonomous Marine Operations and Systems, Department of Engineering Cybernetics, Norwegian University of Science and Technology, Trondheim, Norway
Auto-generated profile, based on publicly available information
Andrea Cristofaro
Centre for Autonomous Marine Operations and Systems, Department of Engineering Cybernetics, Norwegian University of Science and Technology, Trondheim, Norway
This paper describes a concept for a collision avoidance system for ships, which is based on model predictive control. A finite set of alternative control behaviors are generated by varying two parameters: offsets to the guidance course angle commanded to the autopilot and changes to the propulsion command ranging from nominal speed to full reverse. Using simulated predictions of the trajectories of the obstacles and ship, compliance with the Convention on the International Regulations for Preventing Collisions at Sea and collision hazards associated with each of the alternative control behaviors are evaluated on a finite prediction horizon, and the optimal control behavior is selected. Robustness to sensing error, predicted obstacle behavior, and environmental conditions can be ensured by evaluating multiple scenarios for each control behavior. The method is conceptually and computationally simple and yet quite versatile as it can account for the dynamics of the ship, the dynamics of the steering and propulsion system, forces due to wind and ocean current, and any number of obstacles. Simulations show that the method is effective and can manage complex scenarios with multiple dynamic obstacles and uncertainty associated with sensors and predictions.
It is proposed to estimate wind velocity, Angle-Of-Attack (AOA) and Sideslip Angle (SSA) of a fixed-wing Unmanned Aerial Vehicle (UAV) using only kinematic relationships with a Kalman Filter (KF), avoiding the need to know aerodynamic models or other aircraft parameters. Assuming that measurements of airspeed and attitude of an UAV are available as inputs, a linear 4th order time-varying model of the UAV's longitudinal speed and the 3-D wind velocity is used to design a Kalman-filter driven by a GNSS velocity measurement airspeed sensor. An observability analysis shows that the states can be estimated along with an airspeed sensor calibration factor provided that the flight maneuvers are persistently exciting, i.e. the aircraft changes attitude. The theoretical analysis of the KF shows that global exponential stability of the estimation error is achieved under these conditions. The method is tested using experimental data from three different UAVs, using their legacy autopilot to provide basic estimates of UAV velocity and attitude. The results show that convergent estimates are achieved with typical flight patterns indicating that excitation resulting from the environment and normal flight operation is sufficient. Wind velocity estimates correlate well with observed winds at the ground. The validation of AOA and SSA estimates is preliminary, but indicate some degree of correlation between the AOA estimate and vertical accelerometer measurements, as would be expected since lift force can be modeled as a linear function of AOA in normal flight.
In this paper, the problem of control allocation is revisited focusing on weakly redundant plants, that is plants having more inputs than outputs but such that no input can be equivalently substituted by a combination of the others. Considering the case of asymptotically constant references, it is shown that input allocation can be used to optimize the steady state input, without altering (even during transients) the output response induced by any a priori given controller. Moreover, a general structure for the allocator is proposed, consisting of a series connection of a steady-state optimizer and an annihilator.
We propose to estimate steady and turbulent wind velocities and aerodynamic coefficients of a fixed-wing Unmanned Aerial Vehicle (UAV) by using frequency separation as well as kinematic, aerodynamic and wind models combined in an Extended Kalman Filter (EKF). With these estimates it is possible to calculate the angle of attack and the magnitude of the airspeed. Avoiding the need for prior knowledge of UAV parameters, the proposed method utilizes only sensor information that is part of a standard sensor suite, which consists of a Global Navigation Satellite System (GNSS), an Inertial Measurement Unit (IMU) and a pitot-static tube, and attitude information obtained from these sensors. An observability analysis shows that attitude changes are necessary during the initialization phase and from time to time during the flight. Simulation results indicate that, with typical sensor accuracy, the estimates are close to the reference values of the aerodynamic coefficients and wind velocities and is capable of estimating the Angle of Attack with an Root Mean Square Error (RMSE) of 0.33°, the Sideslip Angle with an RMSE of 3.21° and the airspeed with an RMSE of 0.23 m/s.
28 October 2018 in International Journal of Robust and Nonlinear Control
Summary: This paper proposes a linear parameter varying (LPV) interval unknown input observer for the robust fault diagnosis of actuator faults and ice accretion in unmanned aerial vehicles (UAVs) described by an uncertain model. The proposed interval observer evaluates the set of values for the state, which are compatible with the nominal fault‐free and icing‐free operation and can be designed in such a way that some information about the nature of the unknown inputs affecting the system can be obtained, thus allowing the diagnosis to be performed. The proposed strategy has several advantages. First, the LPV paradigm allows taking into account operating point variations. Second, the noise rejection properties are enhanced by the presence of the integral term. Third, the interval estimation property guarantees the absence of false alarms. Linear matrix inequality–based conditions for the analysis/design of these observers are provided in order to guarantee the interval estimation of the state and the boundedness of the estimation. The developed theory is supported by simulation results, obtained with the uncertain model of a Zagi Flying Wing UAV, which illustrate the strong appeal of the methodology for identifying correctly unexpected changes in the system dynamics due to actuator faults or icing.