27 December 2016 in Journal of Vacuum Science & Technology A
Thin films of niobium nitride are useful for their physical, chemical, and electrical properties. NbN superconducting properties have been utilized in a wide range of applications. Plasma-enhanced atomic layer deposition (PEALD) of NbN with (t-butylimido) tris(diethylamido) niobium(V) and remote H2/N2 plasmas has been investigated. Deposited film properties have been studied as a function of substrate temperature (100–300 °C), plasma power (150–300 W), and H2 flow rate (10–80 sccm). PEALD NbN films were characterized with spectroscopic ellipsometry (thickness, optical properties), four point probe (resistivity), x-ray photoelectron spectroscopy (composition), x-ray reflectivity (density and thickness), x-ray diffraction (crystallinity), and superconductivity measurements. Film composition varied with deposition conditions, but larger cubic NbN crystallites and increased film density at higher substrate temperatures and H2 flow rates lead to room temperature resistivity values as low as 173 μΩ cm and superconductivity critical temperatures as high as 13.7 K.
14 August 2017 in Superconductor Science and Technology
NbTiN has a variety of superconducting applications, ranging from RF cavities to single-photon detectors. Here, we systematically investigated the plasma-enhanced atomic layer deposition (PEALD) of Nb
x
Ti with the organometallic precursors ( t -butylimido) tris(diethyamido) niobium(V) and tetrakis (dimethylamido) titanium in conjunction with a remote H 2 /N 2 plasma. Deposited film properties have been studied as a function of the ratio of Nb to Ti precursor pulses within each ALD supercycle. PEALD NbTiN films were characterized with spectroscopic ellipsometry (thickness, optical properties), four point probe (resistivity), x-ray photoelectron spectroscopy (composition), x-ray reflectivity (density and thickness), x-ray diffraction (crystallinity), and superconductivity measurements. The PEALD process has shown distinct advantages over deposition of superconducting films via thermal ALD or sputtering, for example a lower processing temperature and more efficient control of film composition. This control of film composition enabled the tuning of electrical and superconducting properties, such as varying the superconducting critical temperature T C between 6.9 and 13.2 K.
29 October 2012 in Chemistry of Materials
26 August 2016 in Journal of Vacuum Science & Technology A
Tungsten nitride (WN) has potential as an interconnect barrier film. Deposition of WN films with bis(tert-butylimido)bis(dimethylamido)tungsten utilizing plasma-enhanced atomic layer deposition has been investigated over a temperature range of 100–400 °C employing N2, H2/N2, and NH3 remote plasmas. Spectroscopic ellipsometry has been used to determine film thickness and optical properties. Film growth rate varied from 0.44 to 0.65 Å/cycle. Chemical composition was investigated with x-ray photoelectron spectroscopy. W:N ratios varied from 0.95:1 to 3.76:1 and carbon levels were sub-2% for atomic layer deposition conditions. Resistivity measurements, derived from four-point probe measurements, indicate higher deposition temperature and gas flow rates produce the lowest resistivity films. The lowest resistivity film of the study, which measured 405 μΩ cm, was deposited with a hydrogen-rich H2/N2 plasma at 400 °C.
4 December 2017 in The Journal of Physical Chemistry C
7 April 2016 in The Journal of Physical Chemistry C