1 December 2019 in AIP Advances
This work reports the development of perpendicular magnetic tunnel junctions, based on a multilayered stack of [Tb/Co] nanolayers, in which the magnetization can be reliably toggled using a single optical pulse. The helicity-independent single-shot switching of the magnetization in the Tb/Co multilayered stack was achieved using either 60 fs-long or 5 ps laser pulses with incident fluences down to 4.7 mJ/cm2. The magnetic switching was achieved for a Co-rich composition window of the multilayer corresponding to layer thickness ratios tCo/tTb between 1.3-1.5. This was confirmed for the multilayer alone as well as for the multilayer coupled to aCoFeB electrode, with a structure consisting of CoFeB/Ta/[Tb/Co]N. The optical switching is preserved even after annealing at 250°C in magnetic tunnel junctions (MTJ) electrodes, exhibiting a tunnel magnetoresistance (TMR) of 41% and RxA value of 150 Ωμm after its integration, measured on unpatterned MTJ stacks. These results represent the first step towards the development of hybrid spintronic photonic systems with fJ switching energies.
26 August 2022 in Physical Review B
We analyze the micromagnetics of short longitudinal modulations of a high-magnetization material in cylindrical nanowires made of a soft-magnetic material of lower magnetization such as permalloy, combining magnetic microscopy, analytical modeling, and micromagnetic simulations. The mismatch of magnetization induces curling of magnetization around the axis in the modulations, in an attempt to screen the interfacial magnetic charges. The curling angle increases with modulation length, until a plateau is reached with nearly full charge screening for a specific length scale , larger than the dipolar exchange length of any of the two materials. The curling circulation can be switched by the Oersted field arising from a charge current with typical magnitude for a diameter of nm, and reaching a maximum for .
28 April 2025 in Physical Review Research
Topology is a powerful tool for categorizing magnetization textures by defining a topological index in both two-dimensional (2D) systems, such as thin films or curved surfaces, and in 3D bulk systems. In the emerging field of 3D nanomagnetism, both volume and surface topological numbers must be considered, requiring the identification of a proper global topological invariant to support categorization. Here we consider domain walls in cylindrical nanowires as an excellent playground for 3D nanomagnetic systems, excited by a charge current, that generates an Œrsted field. We first provide experimental evidence of previously unreported domain-wall transformations of topology occurring at the nanosecond timescale. We investigate these transformations with micromagnetic simulations, tracking both bulk and surface topological signatures. We demonstrate a topological invariant combining both signatures, while the topological charge varies from bulk to surface during the dynamics. The experimental change of topology is reproduced when the pulse duration matches the timescale of the internal transformations of the wall, and the current is switched off before the transformation is complete. We expect that the topological categorization and dynamical exploitation apply to any 3D nanomagnetic system. Published by the American Physical Society 2025
16 January 2024 in Scripta Materialia
23 July 2020 in Nanotechnology
The all-optical magnetization reversal of magnetic layers, by picosecond optical pulses, is of particular interest as it shows the potential for energy-efficient and fast magnetic tunnel junction (MTJ) elements. This approach requires memory elements that are optically and electronically accessible, for optical writing and electronic read-out. In this paper, we propose the integration of indium tin oxide (ITO) as a transparent conducting electrode for magnetic tunnel junctions in integrated spintronic–photonic circuits. To provide light with sufficient energy to the MTJ free layer and allow electrical read-out of the MTJ state, we successfully integrated indium tin oxide as a top transparent electrode. The study shows that ITO film deposition by physical vapor deposition with conditions such as high source power and low O 2 flow achieves smooth and conductive thin films. Increase in grain size was associated with low resistivity. Deposition of 150 nm ITO at 300 W, O 2 flow of 1 sccm and 8.10 −3 mbar vacuum pressure results in 4.8 × 10 −4 Ω.cm resistivity and up to 80% transmittance at 800 nm wavelength. The patterning of ITO using CH 4 /H 2 chemistry in a reactive ion etch process was investigated showing almost vertical sidewalls for diameters down to 50 nm. The ITO based process flow was compared to a standard magnetic tunnel junctions fabrication process flow based on Ta hard mask. Electrical measurements validate that the proposed process based on ITO results in properties equivalent to the standard process. We also show electrical results of magnetic tunnel junctions having all-optical switching top electrode fabricated with ITO for optical access. The developed ITO process flow shows very promising initial results and provides a way to fabricate these new devices to integrate all-optical switching magnetic tunnel junctions with electronic and photonic elements.
23 June 2025 in Nano Letters
PMPamela Morales-Fernández
+9
This study integrates multiple microscopy techniques to investigate the effect of introducing axial compositional gradients on the magnetic properties of Fe-Ni ferromagnetic nanowires. We study the chemical structure of the nanowires using photoemission electron microscopy and transmission (X-ray and electron) microscopy. We explore the magnetic properties through magnetic force microscopy, complemented by micromagnetic simulations, and we characterize the 3D magnetization vector by measuring magnetic circular dichroism using X-ray microscopies. We observe that variations in the Fe/Ni ratio induce localized magnetic curling in Fe-rich regions, while Ni-rich segments predominantly exhibit axial magnetization, demonstrating how compositional gradients can control magnetic domain configurations on the nanoscale. Our results highlight the value of multimodal imaging for uncovering the interplay among structural, chemical, and magnetic properties in complex nanostructures. These findings represent a significant step toward the manipulation of magnetic domains in nanowires, which is essential for future devices based on 3D nanomagnetic architectures.