1 May 2012 in Proceedings of the IEEE
Thin-film electronics in its myriad forms has underpinned much of the technological innovation in the fields of displays, sensors, and energy conversion over the past four decades. This technology also forms the basis of flexible electronics. Here we review the current status of flexible electronics and attempt to predict the future promise of these pervading technologies in healthcare, environmental monitoring, displays and human-machine interactivity, energy conversion, management and storage, and communication and wireless networks.
1 January 2010 in Sensors and Actuators B: Chemical
15 August 2007 in Journal of Applied Physics
Ink-jet printing is an important process for placing active electronics on plastic substrates. We demonstrate ink-jet printing as a viable method for large area fabrication of carbon nanotube (CNT) thin film transistors (TFTs). We investigate different routes for producing stable CNT solutions (“inks”). These consist of dispersion methods for CNT debundling and the use of different solvents, such as -methyl-2-pyrrolidone. The resulting printable inks are dispensed by ink-jet onto electrode bearing silicon substrates. The source to drain electrode gap is bridged by percolating networks of CNTs. Despite the presence of metallic CNTs, our devices exhibit field effect behavior, with effective mobility of and ON/OFF current ratio of up to 100. This result demonstrates the feasibility of ink-jet printing of nanostructured materials for TFT manufacture.
1 May 2009 in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
Deep reactive ion etching (DRIE) is investigated as a tool for the realization of nanostructures and architectures, including nanopillars, silicon nanowires or carbon nanotubes on Si nanopillars, nanowalls, and nanonetworks. The potential of combining top-down fabrication methods with the bottom-up synthesis of one-dimensional nanocomponents is assessed. The field-emission properties of carbon nanotubes/Si pillars hybrid structures are measured, as well as the transport properties of large-area nanowires obtained via nanowire lithography. The potential of DRIE for the fabrication of three-dimensional nanostructures is also revealed.